This technique allows to adhere decoration graphic films onto the steps and risers of an escalator. The special graphic films developed jointly with 3M Japan and the patented installation method have enabled to stick safely on uneven surfaces and to peel off cleanly after use. Your idea will find a wide variety of application such as a notice for preventing fall accident, sales-floor instructions, and an advertisement for sales promotion.
|Asai Marking System Corporation|
|Address||2-3-13 Kurigi, Asao-ku, Kawasaki, Kanagawa 215-0033|
This technology produces machinery that can precisely scrape and grind hard materials, such as cemented carbide, ceramics, and diamonds, using diamond grindstones or powder. In the processing of pins and shafts, this technology achieved high processing accuracy of one hundred-thousandth of a millimeter (10 nano) for the outer diameter accuracy, roundness, and surface roughness.
|Sanwa Creation Co., Ltd.|
|Address||1-26-8 Miyauchi, Nakahara-ku, Kawasaki, Kanagawa 211-0051|
Based on a unique mold design free of fixed concepts, this technology enabled the development and commercialization of press working products with hard-to-process or fine shapes that had been considered difficult to press from the viewpoint of conventional press working. The technology contributes to the high-quality, low-cost production of products with difficult-to-process or fine shapes.
|JKB Co., Ltd.|
|Address||2-34-21 Shimosakunobe, Takatsu-ku, Kawasaki, Kanagawa 213-0033|
This technology enables the screen-printing of the entire circumference of multangular shapes (such as boxes) and elliptical cylinders (oval bottles) in one operation. The result is a beautiful finish with no seams for a significant reduction in printing costs.
|Daiya Technical Arts Co., Ltd.|
|Address||119 Kanigaya, Takatsu-ku, Kawasaki, Kanagawa 213-0025|
A newly established high-strength, heat-resistant glass-incorporating nylon-casting technique made possible by harnessing casting techniques developed over many years by the company. This technique enables cheaper, faster processing than conventional production techniques entailing the utilization of metal molds and machining procedures. Weight savings to achieve improvements in fuel consumption have been sought in the automotive industry, a sector of the economy that has been marked in recent years by eco-oriented trends. The company’s techniques are being harnessed as manufacturers make the switch from metal parts to resin parts.
|Nikougiken Co., Ltd.|
|Address||6-14-12 Tsuchihashi, Miyamae-ku, Kawasaki, Kanagawa 216-0005|
This fine combined resin cutting processing technology had been cultivated by this company over the years to perform thin-wall processing, fine slit processing, small-diameter hole making, and fine screw gear cutting using a machining center for five-axis simultaneous machining. This technology supports the special processing that tends to break tools and where it is difficult to achieve the required dimensional accuracy with ordinary cutting methods or clamps.
|Nissei-Kogyo Co., Ltd.|
|Address||2-24-1 Miyauchi, Nakahara-ku, Kawasaki, Kanagawa 211-0051|
The plating solution used with this technology was developed completely in house. Offering precise gold plating and optimum foundation plating film according to user specifications succeeded in reducing the thickness of gold plating by over 50 percent compared to conventional gold plating and achieved cost reductions while maintaining the electrical function and corrosion resistance.
|Address||【Headquarters】Masonic 39MT Building 8F, 2-4-5 Azabudai, Minato-ku, Tokyo 106-0041
【Kawasaki plant】3-11-1 Wataridashincho, Kawasaki-ku, Kawasaki, Kanagawa 210-0844
Precise management of one of the largest dedicated electroless nickel plating lines in the country makes it possible to apply thick plating at least 200 μm thick for precision machinery components in complicated shapes. Applying the plating film uniformly using a chemical reaction provides superior corrosion control.
|Brother Co., Ltd.|
|Address||3-8 Asano-cho, Kawasaki-ku, Kawasaki, Kanagawa 210-0854|
This resin mold processing method makes resin brand logos and spins (processing for showing radial light streaks on a surface) on the surface of electric appliances look clearer than conventional appliances and reduces costs. This method achieved highly durable clear logo marks and spinning of non-conventional shapes.
|Moltec Co., Ltd.|
|Address||2-6-9 Miyauchi, Nakahara-ku, Kawasaki, Kanagawa 211-0051|
Using a profile grinder, this mirrored surface processing technology grinds ultra-hard materials with an accuracy of ±1 μｍ. Ever since its founding, this company has worked exclusively in profile processing, and with this technology, we guarantee a mirrored surface with Rz 0.2 μｍ or less, providing approximately double the accuracy of our competitors. Our products are mainly used for high precision press molds for micro-connectors and in-vehicle connectors.
|Apic Co., Ltd.|
|Address||744-8 Unane Takatsu-ku, Kawasaki-shi , Kanagawa 213-0031|
This technology is used to produce metal foils of less than 0.1mm in thickness nonstandardized by JIS, especially to produce ultimately thin micronised foils and tolerances of thickness. This company utilizes their own strip processing know-hows and heat treatment technologies to produce various metal foils, which is said to be difficult to create in the industry. They have established techniques to produce titan foils of 1μm in thickness, and pure magnesium of 3μm in thickness.
|RIKAZAI Co., Ltd.|
|Address||1810-7, Shimonumabe, Nakahara-ku, Kawasaki city, Kanagawa 211-0011, Japan|