12th

12th, Construction and civil engineering products

“Celbon” Preassembled Reinforcement of R/C Slab for Temporary Opening

This device is a temporary opening unit installed in a construction site for raising lumber for curing and tools from a lower floors to an upper floor. Integrating to a single unit, which conventionally needs multiple job steps for installation, allows to significantly shorten process days and to reduce industrial wastes.

 
AXXE Co., Ltd.
Address 4-6-7 Asada, Kawasaki-ku ,Kawsaki, Kanagawa 210-0847
Tel +81-44-366-6242
Fax +81-44-366-6246

12th, Construction and civil engineering products

Assembling Soundproof Chamber “Music Cabin”

Assembling Soundproof Chamber "Music Cabin"

This product is a prefabricated soundproof chamber developed using the sound proof technology based on the knowledge obtained by the academia-industry cooperation. A short-term construction is achievable by assembling prefabricated soundproof panels with high stiffness which are manufactured in the factory in advance. After construction, sound tuning corresponding to the customer’s preference can be performed by altering installation of the acoustic panel or interior materials.

 
Takahashi Kensetsu Co., Ltd
Address 1-7-8 Shiboku, Miyamae-ku, Kawasaki, Kanagawa 216-0032
Tel +81-44-853-0547
Fax +81-44-852-1588

12th, Construction and civil engineering products

Anti-slip Resin “Multi Grip” Series

Anti-slip Resin "Multi Grip" Series

Durable anti-slip resin is developed based on the original design with company-owned know-how. The product is environmental-friendly because it contains no solvents. It is widely employed as anti-slip material for anti-slip coating, step identification and other purposes where applicable by railway companies in Tokyo metropolitan area, commercial facilities, and nursing facilities.

 

Horiko Industries Co., Ltd.
Address 3-3-2 Hisamoto, Takatsu-ku, Kawsaki, Kanagawa 213-0011
Tel +81-44-829-0091
Fax +81-44-829-0092

12th, Machinery and equipment

Charging Gun

Charging Gun

This product is a battery-operating charging gun developed under a concept of “Anyone can create static electricity anywhere.” This charging gun can generate static electricity up to 25 kV only with four AA dry batteries. You can handle it safely, easily and anywhere because the structure prevents you from getting an electric shock even if you touch the electrode while discharging. By exchanging electrode attachments, the gun is utilized for applications in many fields. It has been used such as in criminal identification, and for static electricity experiments in research institutes.

 
Green-techno Co., Ltd
Address 438 Shibokuchi, Takatsu-ku, Kawasaki, Kanagawa 213-0023
Tel +81-44-755-2431
Fax +81-44-755-0045

12th, Machinery and equipment

Vacuum Suction Tool Stand

Vacuum Suction Tool Stand

This tool stand employs vacuum suction utilizing compressed air from an air compressor. This stand is small and lightweight and can be fixed at any position of a surface plate. One can use it on a stone or ceramic surface plate with a strong suction force, which enables to improve the workability greatly. The product is developed by integrating our machining technology and air control technology, with taking advantage of a patent of one of the major companies.

 
Sasaki Koki Co., Inc.
Address 1-9-33 Shimonoge, Takatsu-ku, Kawasaki, Kanagawa 213-0006
Tel +81-44-844-0338
Fax +81-44-822-0922

12th, Machinery and equipment

Replacement Device for Floppy Disk Drive

Replacement Device for Floppy Disk Drive

This device is a recording media reader replaceable with a floppy disk drive which has finished production. SD cards are usable as floppy disks without changing any part of hardware for PCs and control software. This product is compatible with floppy disk drives with various specifications. SD-card-based device enables to avoid deterioration of data due to abrasion of the recording medium.

 
Denseisirius Co.,Ltd.
Address 3-9-25 Hisamoto, Takatsu-ku, Kawasaki, Kanagawa 213-0011
Tel +81-44-822-7781
Fax +81-44-822-7759

12th, Environmental material, device and equipment

eneidea®

eneidea®

It plans the amount of power generation/storage according to the intended purpose and its power consumption, then performs a one-stop procedure which includes designing an ensured power source, production, and control, with solar cells and lead batteries which are used in the aerospace industry in the USA. With the concept of “Create a power source where there is not”, it designs independent power sources for various environments, such as an aerial power source for electric warning signs in heavy snowfall areas, and “portable/prefabricated temporary power source” for sites in vertical shafts and 3,000 meters deep.

 
KONDO KOGEI Co., Ltd.
Address 710-13 Unane, Takatsu-ku, Kawasaki, Kanagawa 213-0031
Tel +81-44-820-1013
Fax +81-44-820-1048

12th, Production, processing and treatment technologies

Escalator Graphics

Escalator Graphics

This technique allows to adhere decoration graphic films onto the steps and risers of an escalator. The special graphic films developed jointly with 3M Japan and the patented installation method have enabled to stick safely on uneven surfaces and to peel off cleanly after use. Your idea will find a wide variety of application such as a notice for preventing fall accident, sales-floor instructions, and an advertisement for sales promotion.

 
Asai Marking System Corporation
Address 2-3-13 Kurigi, Asao-ku, Kawasaki, Kanagawa 215-0033
Tel +81-44-980-1600
Fax +81-44-980-1603

12th, Measuring equipment and instrument

Temperature Accuracy Checking Tool for Infrared Camera

Temperature Accuracy Checking Tool for Infrared Camera

This measurement equipment enables, in a short period of time and at a low cost, to easily implement temperature accuracy checking of infrared cameras used in the equipment diagnosis. In a conventional calibration period, it is difficult to know from when and how much amount of errors occurred. By reducing the calibration period, this equipment allows to ensure the traceability and improve the reliability of the measurement data.

 
Thermographers Co., Ltd.
Address 1-4-14 Suge, Tama-ku, Kawasaki, Kanagawa 214-0001
Tel +81-44-944-9311
Fax +81-44-944-6988

12th, Measuring equipment and instrument

Moment Measuring Instrument

Moment Measuring Instrument

This product is a measuring instrument of the position of the center of gravity of turbine blades for hydraulic and thermal power generation. This equipment having two scales for weighing enables to obtain the exact position of the center of gravity using an original technique where a blade under test is fixed on a blade fixture and one end of the fixture is fixed to one scale and the other end is point-contacted to the other scale. The exact positioning of the center of gravity allows to achieve balancing of the turbine rotor and reduce bearing loads at high speed rotation, which leads to safe operation and further improvement of energy conversion efficiency.

 
MeasureTech Tsurumi Co.,Ltd
Address 2-7-10 , Oshima, Kawasaki-ku, Kawasaki, Kanagawa 210-0834
Tel +81-44-244-4379
Fax +81-44-244-4497