Industrial Field Index
“Now Field Smoker for Ovens” Smoker for cold smoking also
This smoker freely controls smoke. Hot, warm, and cold smoking are possible. In spite of its simple structure, it has strengths such as being practical, multifunctional, and easy to maintain. Authentic smoking can be easily done at home. Small restaurants, which cannot install large smokers outside due to their location, can also smoke in their kitchen, which will contribute to expanding the menu offered.
| Konno Industrial Co., Ltd. | |
|---|---|
| Address | 2-14-18 Shimonoge, Takatsu-ku, Kawasaki-shi 213-0006, Japan |
| Tel | +81-44-811-7204 |
| Fax | +81-44-811-6057 |
Justop
A patented base sheeting material for hanging large television sets on gypsum wallboard walls safely, quickly, and cost-effectively. Since special processing has been applied to the base sheeting material, it can be inserted into walls through 3 cm x 14 cm openings. Construction work can be completed in a short period of time. Rated for loads of 500 kilograms or more, this material is highly safe. It has been used for the installation of monitors on walls in the nursing stations of the Kawasaki Municipal Hospital.
| JUSTOP Co., Ltd. | |
|---|---|
| Address | 255-4 Shimo-Hirama, Saiwai-ku, Kawasaki, Kanagawa 212-0053 |
| Tel | +81-44-201-9951 |
| Fax | +81-44-201-9961 |
Interior / Household Products, 16th
High-Performance Snowboard Binding Accessory “PLATEPIA®“
Disk plate for a catch (“binding”) to connect the snowboard “board” and “boots”. Compared to the conventional thick, heavy, and hard bindings, this product is overwhelmingly light and flexible, which will help athletes by reducing fatigue and increase performance. The number of snowboarders has been increasing all over the world. This product will improve their technical level, which will contribute to the development in the entire snowboarding industry.
| JPTIGHT Co., Ltd. | |
|---|---|
| Address | 194 Shibokuchi, Takatsu-ku, Kawasaki-shi 213-0023, Japan |
| Tel | +81-44-873-2811 |
| Fax | +81-44-755-9955 |
“SNP-α” series antibacterial paints
This series of colorless antibacterial paints contains titanium-apatite, which has both bacteria and virus inactivation and adsorption functions generated by the photocatalytic effect. The series has a wide variety of applications where an antibacterial effect is needed, such as office automation equipment, equipment for the restaurant industry, and in hospital facilities.
| Sueyoshi Name Plate Factory Co., Ltd. | |
|---|---|
| Address | 1653 Nakanoshima, Tama-ku, Kawasaki, Kanagawa 214-0012 |
| Tel | +81-44-922-4811 |
| Fax | +81-44-922-4812 |
Automated coating weight measurement system and thin film membrane coating device
This is a thin film lamination layer coating device that can instantly measure and manage trace amounts of coating weight, as little as 0.01mg/cm2. It possesses various patented technologies, including the Impact Pulse® construction method that can thinly and uniformly apply coating on various kinds of coating materials, including uneven surfaces.Their fuel cells, water electrolysis, solid-state batteries, next generation rechargeable batteries, and next generation solar cells (Perovskite solar cells) are all highly praised, and are used by world-leading Japanese and overseas companies (for example, vehicle manufacturers and research institutes). This device can also be applied to other fields.
| Mtek-smart Corporation | |
|---|---|
| Address | 【Kawasaki LAB.】KBIC # 115 7 – 7 Shinakawasaki Saiwai-ku Kawasaki, Kanagawa 212-0032 【YOKOHAMA Office】8F,#12 Nisso Bldg.,3-6-12,Shin-yokohama,Kohoku-Ku, Yokohama, Kanagawa 222-0033 |
| Tel | +81-45-620-8062 |
| Fax | +81-45-330-4288 |
Crime Prevention / Disaster Prevention, 20th
Mamoru-kun A – a device that prevents children being left behind by kindergarten busses
To prevent children from being left behind, this product has an alarm function that urges bus crew to inspect the inside of the vehicle after driving. It also has a simple configuration with integrated buttons that let users know about emergencies from kindergarten children. In addition, the device is installed with a “mischief prevention circuit” that does not malfunction even if a child accidentally operates it while the bus is running. It has an excellent sales record and is used by bus manufacturers. It is also expected to be used for the elderly and in the nursing care field in the future.
| VIEWTEC Japan Co., Ltd. | |
|---|---|
| Address | 3-26-6 Shimokodanaka, Nakahara-ku, Kawasaki-shi, 211-0041 |
| Tel | +81-44-777-7771 |
| Fax | +81-44-777-8880 |
Telecommunications / Electronics, 11th
“ZeRo.agri” ICT hydroponic cultivation system
Their AI irrigation fertilization system ZeRo.agri uses cloud-based AI to judge how much water and fertilizer crops need at any particular time, and the control device automatically provides fluid fertilizer and water. This is all done based on solar radiation levels, soil moisture content, and EC value field data obtained from sensors. Soil moisture level and fertilizer level stabilization reduces stress for the crops. Yield increases, quality improvements, and production stabilization helps lead to profit increases for producers, and saving labor time on irrigation fertilization can expand a producer’s scale. By controlling the system remotely with a PC, tablet, or smartphone, and being able to see cultivation data, users can now analyze cultivation themselves.
| Routrek Networks, Inc. | |
|---|---|
| Address | 1F, Shin Mizonokuchi Bldg., 3-5-7, Hisamoto, Takatsu-ku |
| Tel | +81-44-819-4711 |
| Fax | +81-44-819-4713 |
High-Quality, Low-Price, and Stylish Ticket Vending Machine “FMC-27VA”
A large 27-inch touch panel display is incorporated in this stylish ticket vending machine. It is successfully downsized, as it is composed of very high-precision metal plates to eliminate unnecessary space inside the body. Power saving was also realized. Its power consumption is 90 w, which is less than half that of other ticket vending machines with equivalent specifications. This product can be installed in small shops in metropolitan areas, which will contribute to solving the labor shortage, while realizing streamline operations.
| Nagashima-SS Co., Ltd. | |
|---|---|
| Address | Room C, 6F, Kawasaki Bldg., 20-3 Minamimachi, Kawasaki-ku, Kawasaki-shi 210-0015, Japan |
| Tel | +81-44-230-2278 |
| Fax | +81-44-230-2288 |
“Avolon Series” Pile Driver/Pullers
These small and medium-sized pile driver/pullers can meet the demands of construction work in urban areas with strict regulations, where it is difficult with large conventional machines. A solo machine can perform both pile driving and pulling by attaching to a crane or an excavator. They are easy to assemble, disassemble, and transport, which can contribute to shortening the construction period, leading to reduced emissions.
| AVOLON SYSTEMS Co., Ltd. | |
|---|---|
| Address | 4-5 Kojima-cho, Kawasaki-ku, Kawasaki, Kanagawa 210-0861 |
| Tel | +81-44-299-2616 |
| Fax | +81-44-299-1889 |
Interior / Household Products, 17th
Electrostatic Adhesion Board “ESCLIP”
The development of this display board adopts semiconductor device parts manufacturing technology. It allows paper to be easily adhered to it and peeled from it by utilizing weak static electricity. Custom-made products can be ordered to each customer’s specifications. Thanks to its power saving design, the adhesion lasts for approximately half a year with batteries, even with constant operation. This board is expected to be used for a wide variety of applications, including education and performing arts.
| Creative Technology Corporation | |
|---|---|
| Address | 1-11-33 Kamisakunobe, Takatsu-ku, Kawasaki, Kanagawa 213-0034 |
| Tel | +81-44-853-1757 |
| Fax | +81-44-861-5096 |
Reciprocal diagnosis overall water quality observation device “Yu” ODS-8
This device uses a variety of perspectives for analyzing water quality for pool water, tap water, shared community water, and other water sources. As a comprehensive water quality analysis device, this product is the first of its kind worldwide to conduct 8 different measurements simultaneously. In addition to the improved credibility and stability achieved by the precision of the reciprocal diagnostic approach, its self-diagnosis and remote maintenance functions make a completely maintenance-free facility possible.
| Shoei Co., Ltd. | |
|---|---|
| Address | 2-6 Shinagawasaki Saiwai-ku, Kawasaki, Kanagawa 212-0032 |
| Tel | +81-44-589-1601 |
| Fax | +81-44-589-1602 |
The Chemiluminescence Analyzer, a faint luminescence detector and spectrometer
This device detects faint luminescence when organic matter oxidizes and degrades (chemical luminescence). This device was originally used to assess the degradation of cooking oil, but over the past few years it has been used to assess the oxidation and degradation of macromolecules in items such as plastics, cosmetics, and drugs. This device can detect oxidation and degradation that cannot be distinguished using conventional methods, so this device has the potential to explain events with a cause that was heretofore unknown.
| Tohoku Electronic Industrial Co., Ltd. | |
|---|---|
| Address | Rapport Shinmaruko 203, 2-897 Shinmaruko-higashi, Nakahara-ku, Kawasaki, Kanagawa 211-0004 |
| Tel | +81-44-411-1263 |
| Fax | +81-44-411-1839 |
Telecommunications / Electronics, 14th
Micro loT Sensor Module “μPRISM (Micro Prism)”
[μPRISM (micro prism)] is a sensor module which can collect data by wireless radio, as this super small-sized module (smaller than a baby finger nail) incorporates all basic sensors used for a IoT system. It has possibilities to be utilized in various fields including manufacturing, logitics, healthcare, and agriculture, when the sensor mountaing space is limited.
| Elecs Industry Co., Ltd. | |
|---|---|
| Address | 1-22-23, Shinsaku, Takatsu-ku, Kawasaki, Kanagawa 213-0014 |
| Tel | +81-44-854-8281 |
| Fax | +81-44-854-8283 |
“AgriChem” Simple test kit for pesticide residue
This test kit can detect pesticide residue on farm products and so on, without requiring any dedicated instruments. It can perform high-sensitivity residual testing for organophosphorus pesticide and carbamate pesticide, at a low cost and in a short time. Compared to conventional methods (instrumental analysis), it can perform screening procedures at an overwhelmingly cheap cost and in a short time, which can significantly increase the number of tests, and can deliver “safety and security of the food” to more consumers.
| Institute of Microchemical Technology Co., Ltd. | |
|---|---|
| Address | A-19, AIRBIC, 7-7 Shin Kawasaki, Saiwai-ku, Kawasaki-shi 212-0032, Japan |
| Tel | +81-44-201-9889 |
| Fax | +81-44-201-9890 |
Environment-Type Concrete Secondary Product “Weed Control Block”
When dealing with weeds that overgrow in road curbs, it’s necessary to do regular removal work to maintain walking spaces and improve the scenery. This weed control block is aimed at government institutions that are tasked with road maintenance. It uses characteristics that lead plant seeds and stems to grow upwards, and roots to sense the weight and grow downwards. It leads the plants themselves to control their growth, which reduces future weed removal work (removing weeds and spraying weed killers, and is expected to reduce environmental burden.
| Okamura Kenko Co., Ltd. | |
|---|---|
| Address | 4-5-3 Kokandori, Kawasaki-ku, Kawasaki-shi, 210-0852 |
| Tel | +81-44-344-5441 |
| Fax | +81-44-366-2495 |
Interior / Household Products, 17th
Ski/Snowboard Wax “G-SLIDE WAX series”
A plant-based ski/snowboard wax developed with a unique cellulose nanofiber dispersion technology. It can achieve the same glide ability as conventional waxes which are mainly made with petroleum paraffin and fluorine. Unlike conventional waxes, it offers professional-grade performance while preserving the environment, and is expected to expand globally.
| Seiko Kogyo Co., Ltd. | |
|---|---|
| Address | 6-7 Asano-cho, Kawasaki-ku, Kawasaki, Kanagawa 210-0854 |
| Tel | +81-44-366-5855 |
| Fax | +81-44-333-7860 |
“Cheetah Bolt Cable” Power Saving-Type Heater
This heater cable uses a sheet heater made from a high heat generating material, which can generate heat up to 1,200 °C in a few seconds. Its excellent temperature raising speed and waterproof property can be used for gardening and snow melting. Furthermore, it can flexibly be installed according to the size and need. This clean and powerful heating system, that doesn’t use fossil fuels, can contribute to reducing the impact on the environment.
| Netsugen inc. | |
|---|---|
| Address | 1-1-12 Kuriki, Asao-ku, Kawasaki-shi 215-0033, Japan |
| Tel | +81-44-328-9931 |
| Fax | +81-44-328-9941 |
Laser Doppler velocimeter
This device irradiates a moving or rotating subject using a laser light to measure the speed. Since this does not place any load on the measured object and is not affected by color and surface conditions, this device has a variety of different applications in the manufacturing process of transparent and highly functional films, the development of printing equipment, and on hot metal rolling sites.
| Act Electronics Corporation | |
|---|---|
| Address | 4-7-16 Miyauchi, Nakahara-ku, Kawasaki, Kanagawa 211-0051 |
| Tel | +81-44-589-8180 |
| Fax | +81-44-589-8181 |
Telecommunications / Electronics, 9th
“Kaiketsu Shusseki” attendance management system
A system to easily and precisely manage attendance, by simply touching the terminal with IC cards. Student/employee ID cards and transportation IC cards can be used as they are, including Feli Ca (Feli Calite- S), MIFARE, TN2, and ISO15693. Easy introduction with an Excel app. Over 3,200 units have been sold and introduced at over 130 spots!
There are also “Attendance Management System” suited for meetings/trainings at companies/hospitals, and a “Prevention of Attendance Rolls for Others Version” to prevent attending roll call for others.
| Alphamedia Co., Ltd. | |
|---|---|
| Address | Union building, 3-264-3 Kosugi-machi,Nakahara-ku, Kawasaki, Kanagawa 211-0063 |
| Tel | +81-44-712-7481 |
| Fax | +81-44-738-2237 |
“Aging Sheet” Sheet to produce aged ingredients
Bacteria harmless to the human body, which can be used for aging, are pure-cultures to collect their spores and attach them to this sheet, so that “anyone” can age meat or other ingredients “with consistent quality” “in a short period”. It can shorten the inventory period and increase work efficiency at restaurants, while stabilizing the aging quality which usually varies. It can offer the safety and security of the food to consumers.
| Meat Epoch Co., Ltd. | |
|---|---|
| Address | T304, Sangaku Renkei Center, 2-3227 Mita, Tama-ku, Kawasaki-shi 214-0034, Japan |
| Tel | +81-3-6450-6516 |
Parts counter for automobile production lines
This device supplies the right bolts and nuts to operators in automobile production lines right when they need them and in the proper amounts. This company was matched with the Kawasaki Intellectual Property Exchange Project, received permission to use patents owned by a major corporation, and solved the problems with existing products by implementing proprietary improvements developed through a series of prototypes. The product we created in this way is more user-friendly and practical than any other system up until now.
| Mice Co., Ltd. | |
|---|---|
| Address | 3-6-12 Kuji, Takatsu-ku,Kawasaki, Kanagawa 213-0032 |
| Tel | +81-44-813-7530 |
| Fax | +81-44-813-7531 |
Interior / Household Products, 20th
Portable Combustor “M.B.K. Grill Pad”
This product is an assembly-type combustor that does not need any equipment, and can be easily dismantled and assembled with 7 parts. It is lightweight, with all parts being 1.5mm in thickness. It can be repeatedly used with consideration to heat distortion, and is both compact and durable. Because of its design that can perform laser processing to meet the needs of users, they have received inquiries about this product from influencers and events.
| MEYKOU Co., Ltd. | |
|---|---|
| Address | 4-27-14 Kuji, Takatsu-ku, Kawasaki-shi, 213-0032 |
| Tel | +81-44-328-9268 |
| Fax | +81-44-328-9269 |
High Performance Recycled Plastic “Daiplast-Wood”
In order to create this recycled plastic, they sort and crush waste plastic materials such as electric wire coating materials, melt them with heat, inject them into molds, and cool them. With their unique raw material production technologies and molding technologies, the company has achieved a strong and durable (“strong,” “unbreakable,” “rot-proof,” and “rust-proof”) plastic, which has changed the image of conventional recycled plastics.
In addition to its demand as industrial materials for railways, automobiles, and construction, this plastic has also been widely used, including as weights to prevent soccer goals from tipping over.
| Daiichi-Pipe industry co., Ltd. | |
|---|---|
| Address | 9-4 Chidori-cho, Kawasaki-ku, Kawasaki, 210-0865 |
| Tel | +81-44-276-1800 |
| Fax | +81-44-277-0619 |
“SWT-NEO series” digital coating thickness meters
This series of digital coating thickness meters can perform non-destructive measurement of coating thickness. Since these products have a display resolution of 0.1 μm for thickness and require no correction for the effects of noise or drift , data processing capability and usability are superior, and the meters account for Highest Market Share in Japan.
| Sanko Electronic Laboratory Co., Ltd. | |
|---|---|
| Address | 1677 Hisasue, Takatsu-ku, Kawasaki, Kanagawa 213-0026 |
| Tel | +81-44-751-7121 |
| Fax | +81-44-755-3212 |
Telecommunications / Electronics, 4th
Plastic film capacitor
This small, high-performance plastic film capacitor has a wide variety of electronics applications ranging from industrial to commercial use for a high share of the world market. Reducing the film thickness as much as possible enabled the downsizing of this product.
| Taitsu Corporation | |
|---|---|
| Address | 2-23-20 Kizuki, Nakahara-ku, Kawasaki, Kanagawa 211-0025 |
| Tel | +81-44-433-3411 |
| Fax | +81-44-433-3417 |
“Night Cover” Cover for freezing and refrigeration showcases
During the closing hours of the store, it covers the openings of showcases to prevent leakage of cold air. Its lineup, including ones jointly developed with a large enterprise, have a better permeability compared to conventional products, and no frost. It has already been introduced to many supermarkets and convenience stores, to protect perishable and frozen products from dusts, keep them cold or hot, and contribute to cost reduction thanks to its power-saving effect.
| Modern Plastic Corporation | |
|---|---|
| Address | 1-5-8 Kamikodanaka, Nakahara-ku, Kawasaki-shi 211-0053, Japan |
| Tel | +81-44-751-3002 |
| Fax | +81-44-751-4326 |
Label Peeling Machine
When labels started to be used, they were manually peeled from a sheet and applied to a product. This company is a pioneer which has developed a label peeling machine 40 years ago to save such manpower. To be used with various label types, this machine is not multi-functional but specialized in peeling. Though the original design has not changed since it was has developed, this machine with its high durability has been used for more than twenty years.
| UNIC Sangyo Co., Ltd. | |
|---|---|
| Address | 779-2, Unane, Takatsu-ku, Kawasaki, Kanagawa 213-0031 |
| Tel | +81-44-844-5663 |
| Fax | +81-44-833-5526 |
Eco (lead-free brass and lead-free aluminum) spacer
Spacers are components that properly keep a certain space between parts. This company offers approximately 108,000 items, which occupies 60%(estimated) of market share in Japan. This company’s eco spacer is eco-friendly and meets the RoHs Directive, as it uses brass and aluminum which does not contain lead.
| Hirosugi-Keiki Co., Ltd. | |
|---|---|
| Address | 2038-1 Maginu, Miyamae-ku, Kawasaki, Kanagawa 216-0035 |
| Tel | +81-44-855-1320 |
| Fax | +81-44-854-7364 |
Escalator Graphics
This technique allows to adhere decoration graphic films onto the steps and risers of an escalator. The special graphic films developed jointly with 3M Japan and the patented installation method have enabled to stick safely on uneven surfaces and to peel off cleanly after use. Your idea will find a wide variety of application such as a notice for preventing fall accident, sales-floor instructions, and an advertisement for sales promotion.
| Asai Marking System Corporation | |
|---|---|
| Address | 2-3-13 Kurigi, Asao-ku, Kawasaki, Kanagawa 215-0033 |
| Tel | +81-44-980-1600 |
| Fax | +81-44-980-1603 |
Air Power Meter APM Series
A chemistry technology to display invisible air energy in kw units! This product is essential to evaluate energy saving in compressed air lines. At the same time, it can also measure and visualize pressure, flow rate, and temperature in order to maintain compressed air lines.
| Tokyo Meter Co., Ltd. | |
|---|---|
| Address | 10-41 Imaiminami-cho, Nakahara-ku, Kawasaki, Kanagawa 211-8577 |
| Tel | +81-44-738-2401 |
| Fax | +81-44-738-2405 |
Telecommunications / Electronics, 12th
Replacement Device for Floppy Disk Drive
This device is a recording media reader replaceable with a floppy disk drive which has finished production. SD cards are usable as floppy disks without changing any part of hardware for PCs and control software. This product is compatible with floppy disk drives with various specifications. SD-card-based device enables to avoid deterioration of data due to abrasion of the recording medium.
| Denseisirius Co.,Ltd. | |
|---|---|
| Address | 3-9-25 Hisamoto, Takatsu-ku, Kawasaki, Kanagawa 213-0011 |
| Tel | +81-44-822-7781 |
| Fax | +81-44-822-7759 |
Share-Type Soybean Sorting Machine “YOUJINBOU”
This product has a compact design that makes it easy to move. It is a soybean sorting machine aimed at small-scale farmers, which can be shared by several farmers. It’s simple to maintain and has a construction that is easy for anyone to use, and can reduce the burden of soybean sorting work, which farmers carry about by hand.
In addition, it can contribute to employment of disabled people by placing it in welfare facilities, and lead to the creation of local industries.
| OHYA SEISAKUJYO Co., Ltd. | |
|---|---|
| Address | 363 Kamihirama, Nakahara-ku, Kawasaki-shi, 211-0013 |
| Tel | +81-44-522-6247 |
| Fax | +81-44-522-6248 |
Glass Cutter “ULTILE”, Suited for R&D
This cutter is used for cutting a wide variety of substrates for experimental use, including ordinary glass, silicon wafers, and sapphire crystalline substrates. Even beginners can easily cut substrates with its unique and patented functions, such as blade height adjustment and pressure adjustment. In addition, eight types of cutters are available for cutting substrates into sizes optimal along with the purposes of each R&D.
| Astellatech, Inc. | |
|---|---|
| Address | 301, The Meiji University Center for Collaborative Innovation and Incubation, 2-3227 Mita, Tama-ku, Kawasaki, Kanagawa 214-0034 |
| Tel | +81-44-299-7512 |
| Fax | +81-44-299-7514 |
Flat Pin Gate Bush for Injection Mold
A pin gate bush incorporated in an injection mold is located at the edge of a resin passage. With its taper pin-shape, it cuts off automatically when being molded. The problem for customers is that it causes whisker-like leftovers on products from the gate. This company has developed an original-shaped pin gate bush as their first own product; they adopted a flat-shaped edge instead of traditional perfectly circular-shape, so that resin can be solidified quicker and gate leftovers are consistently smaller.
| Ogura Seisakusho Ltd. | |
|---|---|
| Address | 3-19-17, Kamiasao, Asao-ku, Kawasaki, Kanagawa 215-0021 |
| Tel | +81-44-966-5728 |
| Fax | +81-44-954-2039 |
“Nano Grind” fine and precision grinding processing technology
This technology produces machinery that can precisely scrape and grind hard materials, such as cemented carbide, ceramics, and diamonds, using diamond grindstones or powder. In the processing of pins and shafts, this technology achieved high processing accuracy of one hundred-thousandth of a millimeter (10 nano) for the outer diameter accuracy, roundness, and surface roughness.
| Sanwa Creation Co., Ltd. | |
|---|---|
| Address | 1-26-8 Miyauchi, Nakahara-ku, Kawasaki, Kanagawa 211-0051 |
| Tel | +81-44‐740-6800 |
| Fax | +81-44‐740-6801 |
Load cell-type multi Vickers hardness tester
This is the first hardness meter in the world that combines different types of meters with different test methods depending on the type of load and material. The cell-type load application mechanism can measure a wide range of loads consistently over a very wide test load range from 50 g to 50 kg. The range from micro to macro can be covered with this product as well.
| Future-tech Corporation | |
|---|---|
| Address | Talkpier Kawasaki Building 3-5-1 Fujisaki, Kawasaki-ku, Kawasaki, Kanagawa 210-0804 |
| Tel | +81-44‐270-5789 |
| Fax | +81-44‐266-6779 |
Telecommunications / Electronics, 6th
“ERAZER” magnetic data eraser
A device to delete vertical/horizontal magnetic recorded data. It secures safe and immediate deletion of data from magnetic recording media by applying strong magnetism on hard discs.
| DELE Co.,Ltd. | |
|---|---|
| Address | Keihin Bldg., 1-1 Minami-Watarida-cho, Kawasaki-ku, Kawasaki, Kanagawa 210-0855 |
| Tel | +81-44-223-7820 |
| Fax | +81-44-223-7821 |
“VOXELAN” 3D scanner
This non-contact 3D measuring instrument is based on the light-section method where slit-like semiconductor laser scans an object and the reflected light is captured by a CCD camera to create a 3D shape. Since this product is a non-contact type, it is suitable for objects that are impossible to contact and whose shapes change as a result of contact and is mainly utilized in the anthropometric field.
| Hamano Engineering Co., Ltd. | |
|---|---|
| Address | KSP R&D D building #339, 3-2-1 Sakado, Takatsu-ku, Kawasaki, Kanagawa 213-0012 |
| Tel | +81-44-819-2168 |
| Fax | +81-44-819-2171 |
Hydraulic Servo Amplifier “KSV series”
A hydraulic servo amplifier. Unlike conventional products, the output current can easily be switched with an internal switch, according to the rated current of the servo valve. Furthermore, it has both positive and negative feedbacks. It is possible for the PID to be set by a trimmer. It has been introduced in inspection machines and ship anti-rolling devices.
| KOENN Co.,Ltd. | |
|---|---|
| Address | 4-26-41 Kuji, Takatsu-ku, Kawasaki, Kanagawa 213-0032 |
| Tel | +81-44-811-3421 |
| Fax | +81-44-811-2238 |
“MT Cassette” Cassette Mold System
Cassette mold system for plastic injection molding. Unlike the conventional built-in type molds, this product divided the mold into the “mold base” and “mold cores”, to be able to form many types of moldings by simply exchanging mold cores. Compared to conventional molds, it is “low cost”, “space saving”, and has a “short delivery time”. Furthermore, it can reduce warehousing costs and the use of steel materials, which will contribute to reducing the impact on the environment.
| MOLTEC Co., Ltd. | |
|---|---|
| Address | 2-6-9 Miyauchi, Nakahara-ku, Kawasaki-shi 211-0051, Japan |
| Tel | +81-44-777-6744 |
| Fax | +81-50-3737-0117 |
“Infinite ∞ stamping” difficult-to-process and fine shape stamping technology
Based on a unique mold design free of fixed concepts, this technology enabled the development and commercialization of press working products with hard-to-process or fine shapes that had been considered difficult to press from the viewpoint of conventional press working. The technology contributes to the high-quality, low-cost production of products with difficult-to-process or fine shapes.
| JKB Co., Ltd. | |
|---|---|
| Address | 2-34-21 Shimosakunobe, Takatsu-ku, Kawasaki, Kanagawa 213-0033 |
| Tel | +81-44‐888-1121 |
Moment Measuring Instrument
This product is a measuring instrument of the position of the center of gravity of turbine blades for hydraulic and thermal power generation. This equipment having two scales for weighing enables to obtain the exact position of the center of gravity using an original technique where a blade under test is fixed on a blade fixture and one end of the fixture is fixed to one scale and the other end is point-contacted to the other scale. The exact positioning of the center of gravity allows to achieve balancing of the turbine rotor and reduce bearing loads at high speed rotation, which leads to safe operation and further improvement of energy conversion efficiency.
| MeasureTech Tsurumi Co.,Ltd | |
|---|---|
| Address | 2-7-10 , Oshima, Kawasaki-ku, Kawasaki, Kanagawa 210-0834 |
| Tel | +81-44-244-4379 |
| Fax | +81-44-244-4497 |
Telecommunications / Electronics, 13th
Tablet data syncing software and cableless charging rack, “Tablet Admin”
This tablet administrator can sync data for a max of 40 Android smartphones and tablets at once. It has evolved into an RPA tool that can automate kitting, and reduces the effort required for troublesome settings before adoption by 1/10. This software has a wide range of uses that meet various needs, from kitting to managing paperless meetings.
| Toshin Electric Co.,Ltd. | |
|---|---|
| Address | Micom City, 2-6-4 Kuriki, Asou-ku, Kawasaki, Kanagawa 215-0033 |
| Tel | +81-44-980-3120 |
| Fax | +81-44-980-3145 |
“eDENNOSUKE KUN” Non-contact type monitoring sensor for medical and nursing purpose
Advanced image processing technology is adopted to this monitoring sensor for medical and nursing purpose, to analyze images obtained by a high-performance infrared camera for vehicles utilizing irradiation of infrared LED, in order to consistently detect and provide information about the cared person when they “wake up” and “leave the bed”. It substantially reduces false reports, no reports, and ensures the reports do not slip through. In the nursing industry which has difficulties in securing human resources due to low birthrate and aging, this product will contribute in reducing the burdens on caregivers, and solve the labor shortage at facilities.
| Core Futec Co., Ltd. | |
|---|---|
| Address | 2F, KTS Bldg., 2-888 Shin Maruko Higashi, Nakahara-ku, Kawasaki-shi 211-0004, Japan |
| Tel | +81-44-430-5501 |
| Fax | +81-44-430-5502 |
SONOFILE “Ultrasonic Cutter Series”
Their blades vibrate at 20,000 to 40,000 times per second, easily cutting resin products and composite materials that are difficult to cut with ordinary blades. They can be attached to robotic arms for 3D processing, and can operate 24 hours with air cooling. In addition to this product having low initial and running costs and ease of maintenance, it is eco-friendly generating virtually no dust.
| SONOTEC Co., ltd. | |
|---|---|
| Address | 3-28-19 Suenaga, Takatsu-ku, Kawasaki, Kanagawa 213-0013 |
| Tel | +81-44-877-8311 |
| Fax | +81-44-877-8312 |
Kawasaki Glass’ Gravestone KAGLA’
KAGLA (registered trademark number 5823014), uses glass material unlike gravestones that use mainly stone, achieving embossing of colors and patterns that have not been easily expressed with just stone. It uses durable cast glass (patent number 6864878) that can handle Japan’s climate. With exposure tests carried out in Hokkaido and Okinawa, it has excellent results and reliability when it comes to durability (As of 2023, it has not cracked once due to heat exposure). They are the first to manufacture gravestones that use Japanese-made cast glass.
| Oki Seki Co., Ltd. | |
|---|---|
| Address | 11F Socio Isago Bldg., 1-10-2 Isago, Kawasaki-ku, Kawasaki, 210-0006 JAPAN |
| Tel | +81-44-221-1114 |
| Fax | +81-44-221-2233 |
“Kyokumen impresson” one-time curved object and polytope screen-printing technology
This technology enables the screen-printing of the entire circumference of multangular shapes (such as boxes) and elliptical cylinders (oval bottles) in one operation. The result is a beautiful finish with no seams for a significant reduction in printing costs.
| Daiya Technical Arts Co., Ltd. | |
|---|---|
| Address | 119 Kanigaya, Takatsu-ku, Kawasaki, Kanagawa 213-0025 |
| Tel | +81-44-754-6381 |
| Fax | +81-44-754-6391 |
“WM7000 series” EMC (electromagnetic-compatible) noise scanner
Their device visualizes electromagnetic noise from electronic devices such as printed circuit boards. It easily identifies the noise source in detail, by superimposing board images and noise maps. It can also visualize the electromagnetic wave penetration path from the outside, by using an electromagnetic wave irradiation probe. Three-dimensional and time-domain measurements can be performed as options.
| Morita Tech Co., Ltd. | |
|---|---|
| Address | 【Head Office】 3-16-1-601 Kamiasao, Asao-ku, Kawasaki, Kanagawa 215-0021 【Business office】 2113-4 Momura, Inagi-shi, Tokyo 206-0804 |
| Tel | +81-42-401-6330 |
| Fax | +81-42-401-6331 |
Telecommunications / Electronics, 14th
4 Axis Interpolation Motion Control LSI “TMC8100”
Multiaxis control, such as for industrial robots, requires time to control movements and vibration. Also, in many cases it does not have enough cost-effeciency nor productivity. In order to solve these problems, this company has developed a method of interpolation control by using several large-scale integrations (LSI) to synchronize, and has developed an LSI with a function of smoothly synchronizing all motors in use. This LSI can also be applied for medical or nursing care robots which need complicated and smooth movements similar to humans.
| Techno Drive Co., Ltd. | |
|---|---|
| Address | New Well Ikuta Bldg, 101, 1-26-28, Mita, Tama-ku, Kawasaki, Kanagawa 214-0034 |
| Tel | +81-44-935-0072 |
| Fax | +81-44-935-0708 |
Whole Body Capillary Scope “GOKO Bscan Series”
Microscope developed through the manufacturer’s optical technology. Its very clear images make it easy to observe capillaries. Its optical zoom for a wide range of magnifications, from low to very high, does not require lens exchanges, which also makes it easy to observe capillaries on the whole body surface. Glare Proof observation is also possible with an optional cap (patent pending). Furthermore, it can easily be handled as it is small and lightweight. This product has already been utilized in a wide range of fields, including the medical, beauty, and health. By enabling users to see and quantify the shape and blood flow of capillary blood vessels, it supports business cooperation in fields such as medical care, beauty, and health.
| GOKO Imaging Devices Co., Ltd. | |
|---|---|
| Address | GOKO Bldg., 3-380 Tsukagoshi Saiwai-ku, Kawasaki-shi 212-0024, Japan |
| Tel | +81-44-544-1313 |
| Fax | +81-44-555-6157 |