Certification round No.
“Super blast” dry ice blaster
This equipment generates no waste liquid when removing dirt or dust from surfaces using the expansion energy generated from the evaporation of dry ice fragmented to an average size of 0.3 mm in diameter. This product has cleared up the problems of damage to cleaned objects, waste liquid treatment, and poor working conditions for the last time.
| Kyodo International Inc. | |
|---|---|
| Address | 2-10-9 Miyazaki, Miyamae-ku, Kawasaki, Kanagawa 216-0033 |
| Tel | +81-44-852-7575 |
| Fax | +81-44-854-1979 |
Laser Doppler velocimeter
This device irradiates a moving or rotating subject using a laser light to measure the speed. Since this does not place any load on the measured object and is not affected by color and surface conditions, this device has a variety of different applications in the manufacturing process of transparent and highly functional films, the development of printing equipment, and on hot metal rolling sites.
| Act Electronics Corporation | |
|---|---|
| Address | 4-7-16 Miyauchi, Nakahara-ku, Kawasaki, Kanagawa 211-0051 |
| Tel | +81-44-589-8180 |
| Fax | +81-44-589-8181 |
Moment Measuring Instrument
This product is a measuring instrument of the position of the center of gravity of turbine blades for hydraulic and thermal power generation. This equipment having two scales for weighing enables to obtain the exact position of the center of gravity using an original technique where a blade under test is fixed on a blade fixture and one end of the fixture is fixed to one scale and the other end is point-contacted to the other scale. The exact positioning of the center of gravity allows to achieve balancing of the turbine rotor and reduce bearing loads at high speed rotation, which leads to safe operation and further improvement of energy conversion efficiency.
| MeasureTech Tsurumi Co.,Ltd | |
|---|---|
| Address | 2-7-10 , Oshima, Kawasaki-ku, Kawasaki, Kanagawa 210-0834 |
| Tel | +81-44-244-4379 |
| Fax | +81-44-244-4497 |
Flat Pin Gate Bush for Injection Mold
A pin gate bush incorporated in an injection mold is located at the edge of a resin passage. With its taper pin-shape, it cuts off automatically when being molded. The problem for customers is that it causes whisker-like leftovers on products from the gate. This company has developed an original-shaped pin gate bush as their first own product; they adopted a flat-shaped edge instead of traditional perfectly circular-shape, so that resin can be solidified quicker and gate leftovers are consistently smaller.
| Ogura Seisakusho Ltd. | |
|---|---|
| Address | 3-19-17, Kamiasao, Asao-ku, Kawasaki, Kanagawa 215-0021 |
| Tel | +81-44-966-5728 |
| Fax | +81-44-954-2039 |
17th, Interior / Household Products
Electrostatic Adhesion Board “ESCLIP”
The development of this display board adopts semiconductor device parts manufacturing technology. It allows paper to be easily adhered to it and peeled from it by utilizing weak static electricity. Custom-made products can be ordered to each customer’s specifications. Thanks to its power saving design, the adhesion lasts for approximately half a year with batteries, even with constant operation. This board is expected to be used for a wide variety of applications, including education and performing arts.
| Creative Technology Corporation | |
|---|---|
| Address | 1-11-33 Kamisakunobe, Takatsu-ku, Kawasaki, Kanagawa 213-0034 |
| Tel | +81-44-853-1757 |
| Fax | +81-44-861-5096 |
Complete Electronic Resistance – fast electric current response technology for electronic loads
Solves the issues of current resistant loads and electric currents not flowing below the minimum operating voltage for electric load devices. It has the industry’s fastest load electric current response thanks to their unique analog circuit system, realizing complete electronic resistance with electric currents that linearly change from 0V. It is expected to be a technology that supports the power electronics field.
| Keisoku Giken Co., Ltd. | |
|---|---|
| Address | 4-11-1, Minamikase, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0055, Japan |
| Tel | +81-44-223-7948 |
| Fax | +81-44-223-7917 |
6th, Telecommunications / Electronics
“ERAZER” magnetic data eraser
A device to delete vertical/horizontal magnetic recorded data. It secures safe and immediate deletion of data from magnetic recording media by applying strong magnetism on hard discs.
| DELE Co.,Ltd. | |
|---|---|
| Address | Keihin Bldg., 1-1 Minami-Watarida-cho, Kawasaki-ku, Kawasaki, Kanagawa 210-0855 |
| Tel | +81-44-223-7820 |
| Fax | +81-44-223-7821 |
“AL filter” industrial grease filter
This high-performance grease filter is made of 100-micron aluminum fibers, works effectively to prevent kitchen duct fires, and cuts oil components from exhaust air by 92%. The filter eliminates 40% of exhaust air odors, which is the highest level in the country. This product is actually used in a major Japanese-style pub chain and large complex buildings.
| AL-Kougyou Co., Ltd. | |
|---|---|
| Address | 2-75 Minamisaiwai-cho, Saiwai-ku, Kawasaki, Kanagawa 212-0016 |
| Tel | +81-44-555-1185 |
| Fax | +81-44-555-1184 |
“Celbon” Preassembled Reinforcement of R/C Slab for Temporary Opening
This device is a temporary opening unit installed in a construction site for raising lumber for curing and tools from a lower floors to an upper floor. Integrating to a single unit, which conventionally needs multiple job steps for installation, allows to significantly shorten process days and to reduce industrial wastes.
| AXXE Co., Ltd. | |
|---|---|
| Address | 4-6-7 Asada, Kawasaki-ku ,Kawsaki, Kanagawa 210-0847 |
| Tel | +81-44-366-6242 |
| Fax | +81-44-366-6246 |
LED Lighting for a 360º Panoramic Camera「PanoShot R」
The PanoShot R is a round LED lighting stand for use with a 360º panoramic camera. A selfie stick can be attached to the PanoShot R. LED lights are effectively arranged on the PanoShot R so that even distant points are equally illuminated. This allows 360º panoramic images of dark areas to be taken in a single shot. The PanoShot R can reduce the time and effort to film concealed spaces under floors or behind walls during building inspections and on-site inspections of renovation work, and it can vastly increase the efficiency and precision of inspections.
WIT
| Wako Keisoku Corporation | |
|---|---|
| Address | 864-1 Kuji, Takatsu-ku, Kawasaki, Kanagawa 213-0032 |
| Tel | +81-44-833-7181 |
| Fax | +81-44-850-8586 |
| Iwate Denki Seisakusho Co., Ltd. | |
|---|---|
| Address | 4-6-20 Kamisakunobe, Takatsu-ku, Kawasaki, Kanagawa 213-0034 |
| Tel | +81-44-877-5561 |
| Fax | +81-44-866-0303 |
| Tsudayama Seisakusho Co., Ltd. | |
|---|---|
| Address | 779-2 Unane, Takatsu-ku, Kawasaki, Kanagawa 213-0031 |
| Tel | +81-44-833-5508 |
| Fax | +81-44-833-5526 |
Hydraulic Servo Amplifier “KSV series”
A hydraulic servo amplifier. Unlike conventional products, the output current can easily be switched with an internal switch, according to the rated current of the servo valve. Furthermore, it has both positive and negative feedbacks. It is possible for the PID to be set by a trimmer. It has been introduced in inspection machines and ship anti-rolling devices.
| KOENN Co.,Ltd. | |
|---|---|
| Address | 4-26-41 Kuji, Takatsu-ku, Kawasaki, Kanagawa 213-0032 |
| Tel | +81-44-811-3421 |
| Fax | +81-44-811-2238 |
Multi-Function Plastic Spatula S★Speller
Multi-function plastic spatula with an improved double edge shape that maintains strength and thinness. In addition to its current uses for automobile wrapping and sticker removal, it has a wide range of functions including removing oil stains and mud, and affixing films and sheets to windows. Since it went on sale in 2020, it has sold over 60,000 units, including OEM manufacturing.
| Shibuya Ltd. | |
|---|---|
| Address | 4-17-11, Suenaga, Takatsu-ku, Kawasaki-shi, Kanagawa 213-0013, Japan |
| Tel | +81-45-591-9195 |
| Fax | +81-45-591-9196 |
Load cell-type multi Vickers hardness tester
This is the first hardness meter in the world that combines different types of meters with different test methods depending on the type of load and material. The cell-type load application mechanism can measure a wide range of loads consistently over a very wide test load range from 50 g to 50 kg. The range from micro to macro can be covered with this product as well.
| Future-tech Corporation | |
|---|---|
| Address | Talkpier Kawasaki Building 3-5-1 Fujisaki, Kawasaki-ku, Kawasaki, Kanagawa 210-0804 |
| Tel | +81-44‐270-5789 |
| Fax | +81-44‐266-6779 |
Naterun water-retentive and permeable urethane soil improvement agent with cushioning properties
“Naterun”, a urethane soil conditioner with excellent water retention, water permeability, and cushioning properties
Naterun is a urethane soil conditioner that creates a suitable soil environment for lawn growth. Chiba University is currently conducting researches on Naterun, in collaboration with the company UPCON. They conducted a test on people’s psychological changes when walking on (1) lawns on soil without Naterun, and (2) lawns on soil with Naterun. This test result shows that the better cushioning properties of the soil with Naterun has a healing effect. To take greening measures with healing effects, Naterun is the best soil conditioner.
| Upcon Co., Ltd. | |
|---|---|
| Address | KSP East building #611, 3-2-1 Sakado, Takatsu-ku, Kawasaki, Kanagawa 213-0012 |
| Tel | +81-44-820-8120 |
| Fax | +81-44-820-8121 |
Assembling Soundproof Chamber “Music Cabin”
This product is a prefabricated soundproof chamber developed using the sound proof technology based on the knowledge obtained by the academia-industry cooperation. A short-term construction is achievable by assembling prefabricated soundproof panels with high stiffness which are manufactured in the factory in advance. After construction, sound tuning corresponding to the customer’s preference can be performed by altering installation of the acoustic panel or interior materials.
| Takahashi Kensetsu Co., Ltd | |
|---|---|
| Address | 1-7-8 Shiboku, Miyamae-ku, Kawasaki, Kanagawa 216-0032 |
| Tel | +81-44-853-0547 |
| Fax | +81-44-852-1588 |
15th, Interior / Household Products
Dart product brand「L-style」
L-style is Indies JC’s brand of dart tips, flights, and shafts, dart cases, and tip cases. Indies JC offers products with exceptional durability that help to alleviate stress on the thrower, such as tips that stay fastened to the barrel and flights that stay at 90º. L-style is popular because of its stylized designs, which allow throwers to express themselves.
| Indies JC Co., Ltd. | |
|---|---|
| Address | 【Kawasaki Office】2-3-2 Motoki, Kawasaki-ku, Kawasaki, Kanagawa 210-0021 【Head Office】1031-1 Ooaza Ukizuka, Yashio-shi, Saitama 340-0835 |
| Tel | +81-48-933-9300 |
| Fax | +81-48-933-9305 |
SONOFILE “Ultrasonic Cutter Series”
Their blades vibrate at 20,000 to 40,000 times per second, easily cutting resin products and composite materials that are difficult to cut with ordinary blades. They can be attached to robotic arms for 3D processing, and can operate 24 hours with air cooling. In addition to this product having low initial and running costs and ease of maintenance, it is eco-friendly generating virtually no dust.
| SONOTEC Co., ltd. | |
|---|---|
| Address | 3-28-19 Suenaga, Takatsu-ku, Kawasaki, Kanagawa 213-0013 |
| Tel | +81-44-877-8311 |
| Fax | +81-44-877-8312 |
Cellulose nanofiber completely uniform dispersion / Rapid drying technology
Cellulose nanofiber (CNF) is derived from plants. It is researched for various fields as it has features such as being light and strong (1/5 as light as steel and 5 times as strong) and having a low linear expansion coefficient. At Seiko Industries, it is used for both water dispersal and completely uniform dispersal of resin. It is also expected to solve the issue of manufacturing costs for CNF, through the roll drying method that greatly reduces the time required for CNF water removal from several hours to several minutes.
| Seikoh Kogyo Co., Ltd. | |
|---|---|
| Address | 6-7 Asano-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa 210-0854, Japan |
| Tel | +81-44-366-5855 |
| Fax | +81-44-333-7860 |
6th, Interior / Household Products
“524R” scale sports
This large radio control car has an environmentally friendly 25 cc four-stroke gasoline engine. This product is equipped with a universal four-stroke gasoline engine that is the first in the world as the only large (1/5) radio control car that is front-wheel-drive. The remote control technology and mechanical elements cultivated in the security equipment field are incorporated into its component parts.
| Mitsuya Laboratories Inc. | |
|---|---|
| Address | 6-31-18 Kamiasao, Asao-ku, Kawasaki, Kanagawa 215-0021 |
| Tel | +81-44-988-2088 |
| Fax | +81-44-988-6958 |
Eco (lead-free brass and lead-free aluminum) spacer
Spacers are components that properly keep a certain space between parts. This company offers approximately 110,000 items, which occupies 60%(estimated) of market share in Japan. This company’s eco spacer is eco-friendly and meets the RoHs Directive, as it uses brass and aluminum which does not contain lead.
| Hirosugi-Keiki Co., Ltd. | |
|---|---|
| Address | 2038-1 Maginu, Miyamae-ku, Kawasaki, Kanagawa 216-0035 |
| Tel | +81-44-855-1320 |
| Fax | +81-44-854-7364 |
Anti-slip Resin “Multi Grip” Series
Durable anti-slip resin is developed based on the original design with company-owned know-how. The product is environmental-friendly because it contains no solvents. It is widely employed as anti-slip material for anti-slip coating, step identification and other purposes where applicable by railway companies in Tokyo metropolitan area, commercial facilities, and nursing facilities.
| HORIKO Co., Ltd. | |
|---|---|
| Address | 6-6-12 Kamikodanaka, Nakahara-ku, Kawsaki, Kanagawa 211-0053 |
| Tel | +81-44-712-3971 |
| Fax | +81-44-712-3972 |
15th, Interior / Household Products
DejiHan Original Stamps Highly precise stamps with a customized layout
Deji Han is a stamp that uses a special seal face, unlike regular rubber stamps. With Deji Han, you can easily do gradated stamping and stamp face images and small text, things that are difficult to do with regular stamps. You can easily stamp illustrator data and image data (jpeg) without any modifications. It can be used for store stamps with logo marks, company seals and representative seals, square seals and receipt stamps. Of course, you can also easily stamp QR codes, 2D codes, and bar codes.
| Cosmotec Co., Ltd. | |
|---|---|
| Address | 3-16-1 Komukainishimachi, Saiwai-ku, Kawasaki, Kanagawa 212-0004 |
| Tel | +81-44-511-8612 |
| Fax | +81-44-511-8613 |
Heat Exchanger “Cold Plate”
This heat exchanger consists of a copper pipe embedded in a cooling block made of aluminum. The iron plating applied around the copper pipe prevents melting and deformation of the copper pipe during the casting of the aluminum, while improving the adhesion between the copper pipe and the cooling block.
Due to the high cost of copper material with high heat exchangeability properties, stainless steel pipes are usually embedded in the material. However, this product can reduce the cost by improving heat exchangeability.
In the future, this product is expected to be used as a component for equipment in the field of communications.
| SANTEC Co., Ltd. | |
|---|---|
| Address | 2-28-2 Miyauchi, Nakahara-ku, Kawasaki 211-0051 |
| Tel | +81-44-799-9221 |
| Fax | +81-44-799-9223 |
AGF Push Connect
The AGF (artificial ground freezing) construction method involves installing a steel pipe in a rock mass when drilling tunnels, and injecting an agent that hardens to prevent collapses.
Existing steel pipes are connected by workers screwing them in by hand. By turning this into a socket format, the pipes can be connected just by pushing them in together. This method is expected to reduce the labor hours and burden on workers.
| Tokin Oar Co., Ltd. | |
|---|---|
| Address | 4-11 Asano-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa 210-0854, Japan |
| Tel | +81-44-333-0012 |
| Fax | +81-44-333-0321 |
“Fuji Jet” super-high-rise apartment drain cleaning technology
This technology enables the washing of shared drain riser pipes in superhigh-rise apartments taller than 60 meters from ground (20 stories) level. The hose winding system with the speed adjustment function and the special rotary nozzle were developed in house to achieve quality improvement, save labor, improve efficiency, reduce costs, and minimize risks.
| Fujiks Co., Ltd. | |
|---|---|
| Address | 1-8-2 Kaizuka, Kawasaki-ku, Kawasaki, Kanagawa 210-0014 |
| Tel | +81-44-245-0822 |
| Fax | +81-44-245-0824 |
“Gold-saving” plating technology for reducing gold plating
The plating solution used with this technology was developed completely in house. Offering precise gold plating and optimum foundation plating film according to user specifications succeeded in reducing the thickness of gold plating by over 50 percent compared to conventional gold plating and achieved cost reductions while maintaining the electrical function and corrosion resistance.
| AITECHNOLOGY | |
|---|---|
| Address | 【Headquarters】Nissin Tatemono Shinbashi Building 4F,4-6-15 Shinbashi, Minato-ku, Tokyo 105-0004 【Kawasaki plant】3-11-1 Wataridashincho, Kawasaki-ku, Kawasaki, Kanagawa 210-0844 |
| Tel | +81-44-344-5961 |
| Fax | +81-44-344-5023 |
The skin moisture and oil sensor “Natural Sensor”
This skin measurement device was designed to be easily usable by anyone. Our proprietary technology starts measurement immediately once the sensor is in proper contact, and the visualization function for the extent the device is pushing into the skin improves reproducibility, even among users not accustomed to the measuring process.
| Nihon System Research Institute Inc. | |
|---|---|
| Address | Tōkeidensan Nakahara Bld.1F, 5-11-21 Shimokodanaka, Nakahara-ku, Kawasaki, Kanagawa 211-0041 |
| Tel | +81-44-740-3351 |
| Fax | +81-44-740-3352 |
WaxRecycle, a vomit solidifier (quick response kit)
This quick response kit is equipped with a vomit solidifier and consumables needed to clean up vomit. The main ingredient in the solidifier is waste from stripping floor wax when cleaning buildings. The solidifier quickly solidifies vomit, it kills germs, and it eliminates odors. For materials, they reuse materials previously disposed of as waste, including water absorbent polymer collected from floor wax stripped waste liquid, and sawdust. These processes contribute to the prevention of global warming.
| Wako Sangyo Co.,Ltd. | |
|---|---|
| Address | 1-3-17 Kokan-dori, Kawasaki-ku, Kawasaki, Kanagawa 210-0852 |
| Tel | +81-44-333-7283 |
| Fax | +81-44-333-7257 |
High Performance Recycled Plastic “Daiplast-Wood”
In order to create this recycled plastic, they sort and crush waste plastic materials such as electric wire coating materials, melt them with heat, inject them into molds, and cool them. With their unique raw material production technologies and molding technologies, the company has achieved a strong and durable (“strong,” “unbreakable,” “rot-proof,” and “rust-proof”) plastic, which has changed the image of conventional recycled plastics.
In addition to its demand as industrial materials for railways, automobiles, and construction, this plastic has also been widely used, including as weights to prevent soccer goals from tipping over.
| Daiichi-Pipe industry co., Ltd. | |
|---|---|
| Address | 9-4 Chidori-cho, Kawasaki-ku, Kawasaki, 210-0865 |
| Tel | +81-44-276-1800 |
| Fax | +81-44-277-0619 |
High Quality and Low Cost Desktop Small Ticket Machine – FMC-156V
This small ticket machine can be installed even in small stores. It can accept various payment methods such as cash (including large banknotes), credit cards, QR and FeliCa. It is a touch panel type, which is rare for desktop machines. Because of that, the products on sale and menu display can be customized. It can be adopted in small stores where installation is usually difficult due to space and cost reasons, so it is expected to help with work efficiency and labor shortage issues.
| Nagashima Seisakusho Co., Ltd. | |
|---|---|
| Address | Room C, 6F, Kawasaki Bldg., 20-3 Minamimachi, Kawasaki-ku, Kawasaki-shi, Kanagawa 210-0015, Japan |
| Tel | +81-44-230-2278 |
| Fax | +81-44-230-2288 |
“UNI-PELE” environmental resin
Their recyclable bioplastic contains natural organic materials (bamboo, wheat, coffee, etc.) with antibacterial, antiviral, and antifungal effects. It can be processed with conventional molding machines. This safe and secure environmental resin can also reduce toxic gas and CO2 emissions by more than 40% when incinerated. It conforms to the Food Sanitation Law, and is microwavable and dishwasher safe, ideal for houseware. They have commercialized doorknob covers as anti-virus products, and are developing new materials made from waste materials such as bird feathers, sheep fur, and cloth, as well as recycled resin.
| Union Co., Ltd. | |
|---|---|
| Address | 2-3 Idasugiyama-cho, Nakahara-ku, Kawasaki, Kanagawa 211-0036 |
| Tel | +81-44-755-1107 |
| Fax | +81-44-755-6711 |
10th, Interior / Household Products
“Kin tai rei urushi” stainless lacquer ware
The kin tai rei urushi sake cup is made by lacquering a stainless structure processed with the advanced spinning technology of this company. Although lacquering metal has been considered difficult because of the compatibility with the oil components of metals, this company succeeded in achieving this to create a unique product in which a traditional technology is applied to a modern article.
| Aiwa Shibori Co., Ltd. | |
|---|---|
| Address | 3-3-2 Shinsaku, Takatsu-ku, Kawasaki, Kanagawa 213-0014 |
| Tel | +81-44-888-6361 |
| Fax | +81-44-888-6306 |
13th, Crime Prevention / Disaster Prevention
Instantaneous power failure alarm “Eremo”
This device is used when the electricity supply route at energy companies is changed, and when notifying users of temporary power interruptions and blackouts that occur due to lightning. It is low cost and can be simply installed by inserting it into an electrical socket, and can be used for power management at research centers, hospitals, factories, and airports. Recently it is also used for power management of servers, and helps to reduce risk.
| SK Japan Co., Ltd. | |
|---|---|
| Address | 1-19-6 Shimokodanaka Nakahara-ku, Kawasaki, Kanagawa 211-0041 |
| Tel | +81-44-751-5858 |
| Fax | +81-44-766-4114 |
15th, Telecommunications / Electronics
`Dakoku-chan Touch’, an attendance management system supporting IC card and facial recognition
This timecard system allows attendance management and personnel recognition. A user simply needs to hold an IC card, like Pasmo or Suica, over the reader. The system generates 4 types of stamps: Present, Clocked Out, Out of the Office, or Returning. Stamp logs can be checked, employee information can be managed, and the system can be linked to payroll software. This system can easily be introduced by a small or medium-sized company, and it allows a company to product prices low in its industry. Impersonation can be prevented through use of the Facial Recognition option based on an open patent from NHK.
| Data Process Service Co., Ltd. | |
|---|---|
| Address | Parale Mitsui Building 18F, 8 Higashida-cho, Kawasaki-ku,Kawasaki-shi, Kanagawa 210-0005 |
| Tel | +81-44-222-0711 |
| Fax | +81-44-222-7844 |
18th, Telecommunications / Electronics
Remote Automatic Reboot Device “NON FREEZE”
This device solves issues of freezing of electronic devices hidden in the expanding IoT world. When detecting abnormalities in electronic devices (information and communication devices), it reboots the power supply and recovers the device from its frozen (system stop) state to its normal.
The entire series of operations are performed automatically.
In addition to domestic demand, it is expected to be used overseas in the future.
| Value Solution Inc. | |
|---|---|
| Address | Takashige Building 6F, 1-7-5 Isago, Kawasaki-ku, Kawasaki 210-0006 |
| Tel | +81-44-400-1250 |
| Fax | +81-44-271-9432 |
Lead-Free and Cadmium-Free Melting Zinc Plating Processing Technology “Pure Z”
This melted zinc plate processing technology uses electric zinc metal instead of current distilled zinc metal. Issues such as running out of liquid and permeability are solved by adjusting the temperature of the agent and the immersion time. Compared to distilled zinc metal the amount of lead and cadmium, which cause environmental burdens, is as close to zero as possible. This processing technology clears RoHS directives (enacted by the EU, regulates the inclusion of specified harmful substances) and maintains existing corrosion functions.
| Nitto Galvanizing Co., Ltd. | |
|---|---|
| Address | 4-3, Mizue-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa 210-0866, Japan |
| Tel | +81-44-266-7591 |
| Fax | +81-44-287-2973 |
“Kyokumen impresson” one-time curved object and polytope screen-printing technology
This technology enables the screen-printing of the entire circumference of multangular shapes (such as boxes) and elliptical cylinders (oval bottles) in one operation. The result is a beautiful finish with no seams for a significant reduction in printing costs.
| Daiya Technical Arts Co., Ltd. | |
|---|---|
| Address | 119 Kanigaya, Takatsu-ku, Kawasaki, Kanagawa 213-0025 |
| Tel | +81-44-754-6381 |
| Fax | +81-44-754-6391 |
10th, Crime Prevention / Disaster Prevention
QuickNap cuttable air mat bedding for disaster preparedness stockpiles
This air mat and sleeping bag are useful disaster prep supply during emergencies. The air mat has space-saving storage, high durability, excellent insulation, and comfortable cushioning. It features an independent check valve, allowing it to be cut to the desired size when needed, and even children can easily inflate it.
The sleeping bag uses a special material to make it even warmer than a blanket. It can be stored compactly, giving you peace of mind for your emergency preparations.
| SANNAI Co., Ltd. | |
|---|---|
| Address | 1368-2 Higashinaganuma, Inagi-shi, Tokyo 206-0802 |
| Tel | +81-42-401-6690 |
| Fax | +81-42-378-6681 |
Automated coating weight measurement system and thin film membrane coating device
This is a thin film lamination layer coating device that can instantly measure and manage trace amounts of coating weight, as little as 0.01mg/cm2. It possesses various patented technologies, including the Impact Pulse® construction method that can thinly and uniformly apply coating on various kinds of coating materials, including uneven surfaces.Their fuel cells, water electrolysis, solid-state batteries, next generation rechargeable batteries, and next generation solar cells (Perovskite solar cells) are all highly praised, and are used by world-leading Japanese and overseas companies (for example, vehicle manufacturers and research institutes). This device can also be applied to other fields.
| Mtek-smart Corporation | |
|---|---|
| Address | 【Kawasaki LAB.】KBIC # 115 7 – 7 Shinakawasaki Saiwai-ku Kawasaki, Kanagawa 212-0032 【YOKOHAMA Office】8F,#12 Nisso Bldg.,3-6-12,Shin-yokohama,Kohoku-Ku, Yokohama, Kanagawa 222-0033 |
| Tel | +81-45-620-8062 |
| Fax | +81-45-330-4288 |
15th, Telecommunications / Electronics
Profit, a software suite for driving schools
Profit is a software suite for driving schools to manage students from entry to graduation. The suite can manage lessons and testing, it can automatically create calendars, and it can manage instructors. Profit supports PCs, touch screens, tablets, and smartphones. The suite has uniquely developed features: it is linked to Pepper, a robot that handles student reception, it has a CTI system, it allows chats via smartphone, and it has AI software. These features help to make work processes more efficient and to optimize resources, with the ultimate goal of fully automating administrative work for driving schools.
| PROFIT Corporation | |
|---|---|
| Address | Springs Musashi Kosugi 101, 20-5 Imai Minami-cho, Nakahara-ku, Kawasaki, Kanagawa 211-0064 |
| Tel | +81-44-299-8269 |
| Fax | +81-95-804-5438 |
Kawasaki Glass’ Gravestone KAGLA’
KAGLA (registered trademark number 5823014), uses glass material unlike gravestones that use mainly stone, achieving embossing of colors and patterns that have not been easily expressed with just stone. It uses durable cast glass (patent number 6864878) that can handle Japan’s climate. With exposure tests carried out in Hokkaido and Okinawa, it has excellent results and reliability when it comes to durability (As of 2023, it has not cracked once due to heat exposure). They are the first to manufacture gravestones that use Japanese-made cast glass.
| Oki Seki Co., Ltd. | |
|---|---|
| Address | 11F Socio Isago Bldg., 1-10-2 Isago, Kawasaki-ku, Kawasaki, 210-0006 JAPAN |
| Tel | +81-44-221-1114 |
| Fax | +81-44-221-2233 |
Improved Type for Fatigue Strength Ferrule
This structure has the gas that forms during welding go through the upper part of the ferrule. The collar shape of the welded part becomes smooth, and the fatigue strength of the welded part is improved compared to current ferrules. This contributes to a longer lifespan for buildings and bridges.
In addition, it can limit the amount of metal powder (spatter) that occurs when welding, and it reduces the time needed for removal and cleaning. It is expected to reduce the burden for workers.
| Nippon Stud Welding Co., Ltd. | |
|---|---|
| 地址 | 26F, Shinkawasaki Twin Tower West, 1-1-2, Kashimada, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0058, Japan |
| Tel | +81-44-589-4410 |
| Fax | +81-44-589-4412 |
Air Power Meter APM Series
A chemistry technology to display invisible air energy in kw units! This product is essential to evaluate energy saving in compressed air lines. At the same time, it can also measure and visualize pressure, flow rate, and temperature in order to maintain compressed air lines.
| Tokyo Meter Co., Ltd. | |
|---|---|
| Address | 10-41 Imaiminami-cho, Nakahara-ku, Kawasaki, Kanagawa 211-8577 |
| Tel | +81-44-738-2401 |
| Fax | +81-44-738-2405 |
“VOXELAN” 3D scanner
This non-contact 3D measuring instrument is based on the light-section method where slit-like semiconductor laser scans an object and the reflected light is captured by a CCD camera to create a 3D shape. Since this product is a non-contact type, it is suitable for objects that are impossible to contact and whose shapes change as a result of contact and is mainly utilized in the anthropometric field.
| Hamano Engineering Co., Ltd. | |
|---|---|
| Address | KSP R&D D building #339, 3-2-1 Sakado, Takatsu-ku, Kawasaki, Kanagawa 213-0012 |
| Tel | +81-44-819-2168 |
| Fax | +81-44-819-2171 |
Parts counter for automobile production lines
This device supplies the right bolts and nuts to operators in automobile production lines right when they need them and in the proper amounts. This company was matched with the Kawasaki Intellectual Property Exchange Project, received permission to use patents owned by a major corporation, and solved the problems with existing products by implementing proprietary improvements developed through a series of prototypes. The product we created in this way is more user-friendly and practical than any other system up until now.
| Mice Co., Ltd. | |
|---|---|
| Address | 3-6-12 Kuji, Takatsu-ku,Kawasaki, Kanagawa 213-0032 |
| Tel | +81-44-813-7530 |
| Fax | +81-44-813-7531 |
Whole Body Capillary Scope “GOKO Bscan Series”
Microscope developed through the manufacturer’s optical technology. Its very clear images make it easy to observe capillaries. Its optical zoom for a wide range of magnifications, from low to very high, does not require lens exchanges, which also makes it easy to observe capillaries on the whole body surface. Glare Proof observation is also possible with an optional cap (patent pending). Furthermore, it can easily be handled as it is small and lightweight. This product has already been utilized in a wide range of fields, including the medical, beauty, and health. By enabling users to see and quantify the shape and blood flow of capillary blood vessels, it supports business cooperation in fields such as medical care, beauty, and health.
| GOKO Imaging Devices Co., Ltd. | |
|---|---|
| Address | GOKO Bldg., 3-380 Tsukagoshi Saiwai-ku, Kawasaki-shi 212-0024, Japan |
| Tel | +81-44-544-1313 |
| Fax | +81-44-555-6157 |
19th, Telecommunications / Electronics
Two-Way TV Screen Intercom “Touch-Free Intercom”
A contactless interphone designed and developed as an infection prevention measure during the COVID-19 pandemic. It was expanded and developed from the normally used two-way TV interphones for ETC lanes on highways. It enables users to speak while displaying on screens two-way, something that is not often seen in the railway industry. It also enables users to make sign language and send written communications. They will continue to provide products customized to the demands of public transport infrastructure, particularly in the railway industry.
| Kyokko Tsushin System Corporation | |
|---|---|
| Address | 5F Nippon Life Kawasaki Bldg.,1-1 Minami-cho,Kawasaki-ku,Kawasaki,210-0015 JAPAN |
| Tel | +81-44-576-7281 |
| Fax | +81-44-576-7282 |
Agent Storage Management System / Security Cabinet
Around 70% of agent storage-related accidents are caused by humans. By operating the biometrics sensor, weight sensor, and RFID (electronic tag) for opening and closing the agent storage and for agent storage and retrieval management, this security cabinet strengthens security and reduces labor needed.
This item is expected to be in demand for agent and valuable item management, including at medical sites, universities, corporations, drug manufacturers, police stations, and government offices.
| Maquinaengineering Co., Ltd. | |
|---|---|
| Address | 666-7 Unane, Takatsu-ku, Kawasaki-shi, Kanagawa 213-0031, Japan |
| Tel | +81-44-844-7337 |
| Fax | +81-44-844-7286 |
1st, Crime Prevention / Disaster Prevention
“Cyclune” bicycle-parking lot gate
This bicycle parking lot system reduces the total cost of equipment and maintenance to one-third by achieving unattended, power-saving operation of bicycle parking lots. This product introduced in various parts of the nation contributes to society, the community, and the environment.
| Tokaigiken Co., Ltd. | |
|---|---|
| Address | 【Kawasaki Plant】2-14-17 Kuji, Takatsu-ku,Kawasaki, Kanagawa 213-0032 |
| Tel | +81-44-471-8300 |
| Fax | +81-44-471-8575 |
“SNP-α” series antibacterial paints
This series of colorless antibacterial paints contains titanium-apatite, which has both bacteria and virus inactivation and adsorption functions generated by the photocatalytic effect. The series has a wide variety of applications where an antibacterial effect is needed, such as office automation equipment, equipment for the restaurant industry, and in hospital facilities.
| Sueyoshi Name Plate Factory Co., Ltd. | |
|---|---|
| Address | 1653 Nakanoshima, Tama-ku, Kawasaki, Kanagawa 214-0012 |
| Tel | +81-44-922-4811 |
| Fax | +81-44-922-4812 |