Certification round No.

Measuring Instruments, 12th

Moment Measuring Instrument

Moment Measuring Instrument

This product is a measuring instrument of the position of the center of gravity of turbine blades for hydraulic and thermal power generation. This equipment having two scales for weighing enables to obtain the exact position of the center of gravity using an original technique where a blade under test is fixed on a blade fixture and one end of the fixture is fixed to one scale and the other end is point-contacted to the other scale. The exact positioning of the center of gravity allows to achieve balancing of the turbine rotor and reduce bearing loads at high speed rotation, which leads to safe operation and further improvement of energy conversion efficiency.

 
MeasureTech Tsurumi Co.,Ltd
Address 2-7-10 , Oshima, Kawasaki-ku, Kawasaki, Kanagawa 210-0834
Tel +81-44-244-4379
Fax +81-44-244-4497

Interior / Household Products, 14th

Hybrid Soap from Kawasaki “Takara-Project Soap”

Hybrid Soap from Kawasaki "Takara-Project Soap"

This bodywash soap was born in Kawasaki, by mixing “Titanium apatite”, a photocatalyst jointly has developed by Tokyo University and FUJITSU LABORATORIES. Ltd., and the technology for “Applitech”, a functional solution has developed by this company. This soap inhibits unpleasant odors and gently keeps the skin clean.

 
Takara Youjou Shizai Co., Ltd.
Address 2-19-17, Sugao, Miyamae-ku, Kawasaki, Kanagawa 216-0015
Tel +81-44-976-0666
Fax +81-44-976-4688

Healthcare / Welfare, 16th

Shower Head Position Adjustment Apparatus “BV SHOWER ARM”

Shower Head Position Adjustment Apparatus "BV SHOWER ARM"

This shower arm is to adjust the shower head to the position and angle to the preference of the user, and fix the shower head to a comfortable position. The position of the shower head can be pulled toward the user by 20 cm by only inserting this product in the existing shower holder, reducing the burden of raising and lowering the arm. It enables those who cannot move freely, due to symptoms such as rheumatism and arthralgia, to take showers without stress.

 
Matsuhashi.cc Company
Address 2-1-22 Ogura, Saiwai-ku, Kawasaki-shi 212-0054, Japan
Tel +81-44-587-8581
Fax +81-44-587-8596

Telecommunications / Electronics, 19th

Two-Way TV Screen Intercom “Touch-Free Intercom”

Two-Way TV Screen Intercom “Touch-Free Intercom”

A contactless interphone designed and developed as an infection prevention measure during the COVID-19 pandemic. It was expanded and developed from the normally used two-way TV interphones for ETC lanes on highways. It enables users to speak while displaying on screens two-way, something that is not often seen in the railway industry. It also enables users to make sign language and send written communications. They will continue to provide products customized to the demands of public transport infrastructure, particularly in the railway industry.

 
Kyokko Tsushin System Corporation
Address 5F Nippon Life Kawasaki Bldg.,1-1 Minami-cho,Kawasaki-ku,Kawasaki,210-0015 JAPAN
Tel +81-44-576-7281
Fax +81-44-576-7282

Measuring Instruments, 6th

Load cell-type multi Vickers hardness tester

Load cell-type multi Vickers hardness tester

This is the first hardness meter in the world that combines different types of meters with different test methods depending on the type of load and material. The cell-type load application mechanism can measure a wide range of loads consistently over a very wide test load range from 50 g to 50 kg. The range from micro to macro can be covered with this product as well.

 
Future-tech Corporation
Address Talkpier Kawasaki Building 3-5-1 Fujisaki, Kawasaki-ku, Kawasaki, Kanagawa 210-0804
Tel +81-44‐270-5789
Fax +81-44‐266-6779

10th, Parts / Raw Materials

Eco (lead-free brass and lead-free aluminum) spacer

Eco (lead-free brass and lead-free aluminum) spacer

Spacers are components that properly keep a certain space between parts. This company offers approximately 108,000 items, which occupies 60%(estimated) of market share in Japan. This company’s eco spacer is eco-friendly and meets the RoHs Directive, as it uses brass and aluminum which does not contain lead.

 
Hirosugi-Keiki Co., Ltd.
Address 2038-1 Maginu, Miyamae-ku, Kawasaki, Kanagawa 216-0035
Tel +81-44-855-1320
Fax +81-44-854-7364

Construction, 12th

“Celbon” Preassembled Reinforcement of R/C Slab for Temporary Opening

This device is a temporary opening unit installed in a construction site for raising lumber for curing and tools from a lower floors to an upper floor. Integrating to a single unit, which conventionally needs multiple job steps for installation, allows to significantly shorten process days and to reduce industrial wastes.

 
AXXE Co., Ltd.
Address 4-6-7 Asada, Kawasaki-ku ,Kawsaki, Kanagawa 210-0847
Tel +81-44-366-6242
Fax +81-44-366-6246

Parts / Raw Materials, 14th

Flat Pin Gate Bush for Injection Mold

Flat Pin Gate Bush for Injection Mold

A pin gate bush incorporated in an injection mold is located at the edge of a resin passage. With its taper pin-shape, it cuts off automatically when being molded. The problem for customers is that it causes whisker-like leftovers on products from the gate. This company has developed an original-shaped pin gate bush as their first own product; they adopted a flat-shaped edge instead of traditional perfectly circular-shape, so that resin can be solidified quicker and gate leftovers are consistently smaller.

 
Ogura Seisakusho Ltd.
Address 3-19-17, Kamiasao, Asao-ku, Kawasaki, Kanagawa 215-0021
Tel +81-44-966-5728
Fax +81-44-954-2039

Food Industry, 16th

“Aging Sheet” Sheet to produce aged ingredients

"Aging Sheet" Sheet to produce aged ingredients

Bacteria harmless to the human body, which can be used for aging, are pure-cultures to collect their spores and attach them to this sheet, so that “anyone” can age meat or other ingredients “with consistent quality” “in a short period”. It can shorten the inventory period and increase work efficiency at restaurants, while stabilizing the aging quality which usually varies. It can offer the safety and security of the food to consumers.

 
Meat Epoch Co., Ltd.
Address T304, Sangaku Renkei Center, 2-3227 Mita, Tama-ku, Kawasaki-shi 214-0034, Japan
Tel +81-3-6450-6516

Telecommunications / Electronics, 19th

Proposal Type Business IT System Special Equipment Development Technology

Proposal Type Business IT System Special Equipment Development Technology

This unique development technology incorporates advanced mechanisms, including complete automation of operation and maintenance tasks through simultaneous design and development of system specifications and through independent operation of system functions and cloud utilization. It is also used in government procurement tasks, and enables agile system development and operation that flexibly and rapidly changes, while ensuring a high standard of safety and confidentiality. Based on the law under the jurisdiction of the Ministry of Economy, Trade and Industry, it is employed in the information processing system development of the DX certification system run by the (independent) Information Technology Promotion Agency.

 
Team Sirocco,LLC
Address 6-21-27 Nakanoshima, Tama-ku, Kawasaki 214-0012 JAPAN
Tel +81-44-819-5990
Fax +81-44-819-5990

Interior / Household Products, 6th

“524R” scale sports

“524R” scale sports

This large radio control car has an environmentally friendly 25 cc four-stroke gasoline engine. This product is equipped with a universal four-stroke gasoline engine that is the first in the world as the only large (1/5) radio control car that is front-wheel-drive. The remote control technology and mechanical elements cultivated in the security equipment field are incorporated into its component parts.

 
Mitsuya Laboratories Inc.
Address 6-31-18 Kamiasao, Asao-ku, Kawasaki, Kanagawa 215-0021
Tel +81-44-988-2088
Fax +81-44-988-6958

Technology, 10th

“Gold-saving” plating technology for reducing gold plating

“Gold-saving” plating technology for reducing gold plating

The plating solution used with this technology was developed completely in house. Offering precise gold plating and optimum foundation plating film according to user specifications succeeded in reducing the thickness of gold plating by over 50 percent compared to conventional gold plating and achieved cost reductions while maintaining the electrical function and corrosion resistance.

 
AITECHNOLOGY
Address 【Headquarters】Masonic 39MT Building 8F, 2-4-5 Azabudai, Minato-ku, Tokyo 106-0041
【Kawasaki plant】3-11-1 Wataridashincho, Kawasaki-ku, Kawasaki, Kanagawa 210-0844
Tel +81-44-344-5961
Fax +81-44-344-5023

Construction, 12th

Assembling Soundproof Chamber “Music Cabin”

Assembling Soundproof Chamber "Music Cabin"

This product is a prefabricated soundproof chamber developed using the sound proof technology based on the knowledge obtained by the academia-industry cooperation. A short-term construction is achievable by assembling prefabricated soundproof panels with high stiffness which are manufactured in the factory in advance. After construction, sound tuning corresponding to the customer’s preference can be performed by altering installation of the acoustic panel or interior materials.

 
Takahashi Kensetsu Co., Ltd
Address 1-7-8 Shiboku, Miyamae-ku, Kawasaki, Kanagawa 216-0032
Tel +81-44-853-0547
Fax +81-44-852-1588

Construction, 15th

LED Lighting for a 360º Panoramic Camera「PanoShot R」

LED Lighting for a 360º Panoramic Camera「PanoShot R」

The PanoShot R is a round LED lighting stand for use with a 360º panoramic camera. A selfie stick can be attached to the PanoShot R. LED lights are effectively arranged on the PanoShot R so that even distant points are equally illuminated. This allows 360º panoramic images of dark areas to be taken in a single shot. The PanoShot R can reduce the time and effort to film concealed spaces under floors or behind walls during building inspections and on-site inspections of renovation work, and it can vastly increase the efficiency and precision of inspections.

 

 

WIT

Wako Keisoku Corporation
Address 864-1 Kuji, Takatsu-ku, Kawasaki, Kanagawa 213-0032
Tel +81-44-833-7181
Fax +81-44-850-8586
 
 
Iwate Denki Seisakusho Co., Ltd.
Address 3704 Kamisakunobe, Takatsu-ku, Kawasaki, Kanagawa 213-0034
Tel +81-44-877-5561
Fax +81-44-866-0303
 
 
Tsudayama Seisakusho Co., Ltd.
Address 779-2 Unane, Takatsu-ku, Kawasaki, Kanagawa 213-0031
Tel +81-44-833-5508
Fax +81-44-833-5526
 

Food Industry, 16th

“Night Cover” Cover for freezing and refrigeration showcases

"Night Cover" Cover for freezing and refrigeration showcases

During the closing hours of the store, it covers the openings of showcases to prevent leakage of cold air. Its lineup, including ones jointly developed with a large enterprise, have a better permeability compared to conventional products, and no frost. It has already been introduced to many supermarkets and convenience stores, to protect perishable and frozen products from dusts, keep them cold or hot, and contribute to cost reduction thanks to its power-saving effect.

 
Modern Plastic Corporation
Address 1-5-8 Kamikodanaka, Nakahara-ku, Kawasaki-shi 211-0053, Japan
Tel +81-44-751-3002
Fax +81-44-751-4326

Food Industry, 20th

Share-Type Soybean Sorting Machine “YOUJINBOU”

Share-Type Soybean Sorting Machine

This product has a compact design that makes it easy to move. It is a soybean sorting machine aimed at small-scale farmers, which can be shared by several farmers. It’s simple to maintain and has a construction that is easy for anyone to use, and can reduce the burden of soybean sorting work, which farmers carry about by hand.
In addition, it can contribute to employment of disabled people by placing it in welfare facilities, and lead to the creation of local industries.

 
OHYA SEISAKUJYO Co., Ltd.
Address 363 Kamihirama, Nakahara-ku, Kawasaki-shi, 211-0013
Tel +81-44-522-6247
Fax +81-44-522-6248

Technology, 6th

“Fuji Jet” super-high-rise apartment drain cleaning technology

“Fuji Jet” super-high-rise apartment drain cleaning technology

This technology enables the washing of shared drain riser pipes in superhigh-rise apartments taller than 60 meters from ground (20 stories) level. The hose winding system with the speed adjustment function and the special rotary nozzle were developed in house to achieve quality improvement, save labor, improve efficiency, reduce costs, and minimize risks.

 
Fujiks Co., Ltd.
Address 1-8-2 Kaizuka, Kawasaki-ku, Kawasaki, Kanagawa 210-0014
Tel +81-44-245-0822
Fax +81-44-245-0824

Interior / Household Products, 10th

“Kin tai rei urushi” stainless lacquer ware

“Kin tai rei urushi” stainless lacquer ware

The kin tai rei urushi sake cup is made by lacquering a stainless structure processed with the advanced spinning technology of this company. Although lacquering metal has been considered difficult because of the compatibility with the oil components of metals, this company succeeded in achieving this to create a unique product in which a traditional technology is applied to a modern article.

 
Aiwa Shibori Co., Ltd.
Address 3-3-2 Shinsaku, Takatsu-ku, Kawasaki, Kanagawa 213-0014
Tel +81-44-888-6361
Fax +81-44-888-6306

Construction, 12th

Anti-slip Resin “Multi Grip” Series

Anti-slip Resin "Multi Grip" Series

Durable anti-slip resin is developed based on the original design with company-owned know-how. The product is environmental-friendly because it contains no solvents. It is widely employed as anti-slip material for anti-slip coating, step identification and other purposes where applicable by railway companies in Tokyo metropolitan area, commercial facilities, and nursing facilities.

 

Horiko Industries Co., Ltd.
Address 3-3-2 Hisamoto, Takatsu-ku, Kawsaki, Kanagawa 213-0011
Tel +81-44-829-0091
Fax +81-44-829-0092

Measuring Instruments, 15th

The Chemiluminescence Analyzer, a faint luminescence detector and spectrometer

The Chemiluminescence Analyzer, a faint luminescence detector and spectrometer

This device detects faint luminescence when organic matter oxidizes and degrades (chemical luminescence). This device was originally used to assess the degradation of cooking oil, but over the past few years it has been used to assess the oxidation and degradation of macromolecules in items such as plastics, cosmetics, and drugs. This device can detect oxidation and degradation that cannot be distinguished using conventional methods, so this device has the potential to explain events with a cause that was heretofore unknown.

 
Tohoku Electronic Industrial Co., Ltd.
Address Rapport Shinmaruko 203, 2-897 Shinmaruko-higashi, Nakahara-ku, Kawasaki, Kanagawa 211-0004
Tel +81-44-411-1263
Fax +81-44-411-1839

Parts / Raw Materials, 16th

“MT Cassette” Cassette Mold System

"MT Cassette" Cassette Mold System

Cassette mold system for plastic injection molding. Unlike the conventional built-in type molds, this product divided the mold into the “mold base” and “mold cores”, to be able to form many types of moldings by simply exchanging mold cores. Compared to conventional molds, it is “low cost”, “space saving”, and has a “short delivery time”. Furthermore, it can reduce warehousing costs and the use of steel materials, which will contribute to reducing the impact on the environment.

 
MOLTEC Co., Ltd.
Address 2-6-9 Miyauchi, Nakahara-ku, Kawasaki-shi 211-0051, Japan
Tel +81-44-777-6744
Fax +81-50-3737-0117

Construction, 20th

Environment-Type Concrete Secondary Product “Weed Control Block”

Environment-Type Concrete Secondary Product “Weed Control Block”

When dealing with weeds that overgrow in road curbs, it’s necessary to do regular removal work to maintain walking spaces and improve the scenery. This weed control block is aimed at government institutions that are tasked with road maintenance. It uses characteristics that lead plant seeds and stems to grow upwards, and roots to sense the weight and grow downwards. It leads the plants themselves to control their growth, which reduces future weed removal work (removing weeds and spraying weed killers, and is expected to reduce environmental burden.

 
Okamura Kenko Co., Ltd.
Address 4-5-3 Kokandori, Kawasaki-ku, Kawasaki-shi, 210-0852
Tel +81-44-344-5441
Fax +81-44-366-2495

Environment / Energy, 7th

“UNI-PELE” environmental resin

“UNI-PELE” environmental resin

Their recyclable bioplastic contains natural organic materials (bamboo, wheat, coffee, etc.) with antibacterial, antiviral, and antifungal effects. It can be processed with conventional molding machines. This safe and secure environmental resin can also reduce toxic gas and CO2 emissions by more than 40% when incinerated. It conforms to the Food Sanitation Law, and is microwavable and dishwasher safe, ideal for houseware. They have commercialized doorknob covers as anti-virus products, and are developing new materials made from waste materials such as bird feathers, sheep fur, and cloth, as well as recycled resin.

 
Union Co., Ltd.
Address 2-3 Idasugiyama-cho, Nakahara-ku, Kawasaki, Kanagawa 211-0036
Tel +81-44-755-1107
Fax +81-44-755-6711

10th, Crime Prevention / Disaster Prevention

“Quick Nap” reserve bedding for use in disaster situations

“Quick Nap” reserve bedding for use in disaster situations

The air mattress and sleeping bag has both heat insulating and cushioning properties. The air mattress has a check valve that allows use without repair in the event of a hole. In addition, the sleeping bag has a higher heat retaining capacity than a blanket because it is made of aluminum metallized film. Therefore, the combination of the air mattress and the sleeping bag promptly promotes comfortable sleep even in a disaster.

 
Sannai Automation Co., Ltd.
Address 16-14 Shinjonakacho, Nakahara-ku, Kawasaki, Kanagawa 211-0043
Tel +81-44-751-4596
Fax +81-44-751-9172

Measuring Instruments, 13th

The skin moisture and oil sensor “Natural Sensor”

The skin moisture and oil sensor “Natural Sensor”

This skin measurement device was designed to be easily usable by anyone. Our proprietary technology starts measurement immediately once the sensor is in proper contact, and the visualization function for the extent the device is pushing into the skin improves reproducibility, even among users not accustomed to the measuring process.

 
Nihon System Research Institute Inc.
Address Tōkeidensan Nakahara Bld.1F, 5-11-21 Shimokodanaka, Nakahara-ku, Kawasaki, Kanagawa 211-0041
Tel +81-44-740-3351
Fax +81-44-740-3352

Interior / Household Products, 15th

Dart product brand「L-style」

Dart product brand「L-style」

L-style is Indies JC’s brand of dart tips, flights, and shafts, dart cases, and tip cases. Indies JC offers products with exceptional durability that help to alleviate stress on the thrower, such as tips that stay fastened to the barrel and flights that stay at 90º. L-style is popular because of its stylized designs, which allow throwers to express themselves.

 
Indies JC Co., Ltd.
Address 【Kawasaki Office】2-3-2 Motoki, Kawasaki-ku, Kawasaki, Kanagawa 210-0021
【Head Office】1031-1 Ooaza Ukizuka, Yashio-shi, Saitama 340-0835
Tel +81-48-933-9300
Fax +81-48-933-9305

Machining Equipment, 17th

Glass Cutter “ULTILE”, Suited for R&D

Glass Cutter

This cutter is used for cutting a wide variety of substrates for experimental use, including ordinary glass, silicon wafers, and sapphire crystalline substrates. Even beginners can easily cut substrates with its unique and patented functions, such as blade height adjustment and pressure adjustment. In addition, eight types of cutters are available for cutting substrates into sizes optimal along with the purposes of each R&D.

 
Astellatech, Inc.
Address 301, The Meiji University Center for Collaborative Innovation and Incubation, 2-3227 Mita, Tama-ku, Kawasaki, Kanagawa 214-0034
Tel +81-44-299-7512
Fax +81-44-299-7514

Measuring Instruments, 20th

Measurement Fixture “Air-fix”

Measurement Fixture

To accurately measure objects with 3-dimensional measuring devices, it is necessary to fix the object in place so it does not move. This product is a vacuum holding fixture that objects in any place, including stone surface plates and ceramic surface plates that can’t use magnets. Even while an object is being vacuum fixed, a simple press of the exhaust port can easily move and detach it. Compared to existing screw-type fixtures, it reduces the time needed for fixing objects in place.

 
Sasaki Koki Co., Ltd.
Address 1-9-33 Shimonoge, Takatsu-ku, Kawasaki-shi, 213-0006
Tel +81-44-844-0338
Fax +81-44-822-0922

Technology, 7th

“Kyokumen impresson” one-time curved object and polytope screen-printing technology

“Kyokumen impresson” one-time curved object and polytope screen-printing technology

This technology enables the screen-printing of the entire circumference of multangular shapes (such as boxes) and elliptical cylinders (oval bottles) in one operation. The result is a beautiful finish with no seams for a significant reduction in printing costs.

 
Daiya Technical Arts Co., Ltd.
Address 119 Kanigaya, Takatsu-ku, Kawasaki, Kanagawa 213-0025
Tel +81-44-754-6381
Fax +81-44-754-6391

Healthcare / Welfare, 10th

“VOXELAN” 3D scanner

“VOXELAN” 3D scanner

This non-contact 3D measuring instrument is based on the light-section method where slit-like semiconductor laser scans an object and the reflected light is captured by a CCD camera to create a 3D shape. Since this product is a non-contact type, it is suitable for objects that are impossible to contact and whose shapes change as a result of contact and is mainly utilized in the anthropometric field.

 
Hamano Engineering Co., Ltd.
Address KSP R&D D building #339, 3-2-1 Sakado, Takatsu-ku, Kawasaki, Kanagawa 213-0012
Tel +81-44-819-2168
Fax +81-44-819-2171

Crime Prevention / Disaster Prevention, 13th

Instantaneous power failure alarm “Eremo”

Instantaneous power failure alarm “Eremo”

This device is used when the electricity supply route at energy companies is changed, and when notifying users of temporary power interruptions and blackouts that occur due to lightning. It is low cost and can be simply installed by inserting it into an electrical socket, and can be used for power management at research centers, hospitals, factories, and airports. Recently it is also used for power management of servers, and helps to reduce risk.

 
SK Japan Co., Ltd.
Address 1-19-6 Shimokodanaka Nakahara-ku, Kawasaki, Kanagawa 211-0041
Tel +81-44-751-5858
Fax +81-44-766-4114

Interior / Household Products, 15th

DejiHan Original Stamps Highly precise stamps with a customized layout

DejiHan Original Stamps Highly precise stamps with a customized layout

Deji Han is a stamp that uses a special seal face, unlike regular rubber stamps. With Deji Han, you can easily do gradated stamping and stamp face images and small text, things that are difficult to do with regular stamps. You can easily stamp illustrator data and image data (jpeg) without any modifications. It can be used for store stamps with logo marks, company seals and representative seals, square seals and receipt stamps. Of course, you can also easily stamp QR codes, 2D codes, and bar codes.

 
Cosmotec Co., Ltd.
Address 3-16-1 Komukainishimachi, Saiwai-ku, Kawasaki, Kanagawa 212-0004
Tel +81-44-511-8612
Fax +81-44-511-8613

Construction, 17th

“Avolon Series” Pile Driver/Pullers

These small and medium-sized pile driver/pullers can meet the demands of construction work in urban areas with strict regulations, where it is difficult with large conventional machines. A solo machine can perform both pile driving and pulling by attaching to a crane or an excavator. They are easy to assemble, disassemble, and transport, which can contribute to shortening the construction period, leading to reduced emissions.

 
AVOLON SYSTEMS Co., Ltd.
Address 4-5 Kojima-cho, Kawasaki-ku, Kawasaki, Kanagawa 210-0861
Tel +81-44-299-2616
Fax +81-44-299-1889

Crime Prevention / Disaster Prevention, 20th

Mamoru-kun A – a device that prevents children being left behind by kindergarten busses

Mamoru-kun A - a device that prevents children being left behind by kindergarten busses

To prevent children from being left behind, this product has an alarm function that urges bus crew to inspect the inside of the vehicle after driving. It also has a simple configuration with integrated buttons that let users know about emergencies from kindergarten children. In addition, the device is installed with a “mischief prevention circuit” that does not malfunction even if a child accidentally operates it while the bus is running. It has an excellent sales record and is used by bus manufacturers. It is also expected to be used for the elderly and in the nursing care field in the future.

 
VIEWTEC Japan Co., Ltd.
Address 3-26-6 Shimokodanaka, Nakahara-ku, Kawasaki-shi, 211-0041
Tel +81-44-777-7771
Fax +81-44-777-8880

Measuring Instruments, 7th

Air Power Meter APM Series

Air power meter

A chemistry technology to display invisible air energy in kw units! This product is essential to evaluate energy saving in compressed air lines. At the same time, it can also measure and visualize pressure, flow rate, and temperature in order to maintain compressed air lines.

 
Tokyo Meter Co., Ltd.
Address 10-41 Imaiminami-cho, Nakahara-ku, Kawasaki, Kanagawa 211-8577
Tel +81-44-738-2401
Fax +81-44-738-2405

Telecommunications / Electronics, 11th

“ZeRo.agri” ICT hydroponic cultivation system

“ZeRo.agri” ICT hydroponic cultivation system

Their AI irrigation fertilization system ZeRo.agri uses cloud-based AI to judge how much water and fertilizer crops need at any particular time, and the control device automatically provides fluid fertilizer and water. This is all done based on solar radiation levels, soil moisture content, and EC value field data obtained from sensors. Soil moisture level and fertilizer level stabilization reduces stress for the crops. Yield increases, quality improvements, and production stabilization helps lead to profit increases for producers, and saving labor time on irrigation fertilization can expand a producer’s scale. By controlling the system remotely with a PC, tablet, or smartphone, and being able to see cultivation data, users can now analyze cultivation themselves.

 
Routrek Networks, Inc.
Address 1F, Shin Mizonokuchi Bldg., 3-5-7, Hisamoto, Takatsu-ku
Tel +81-44-819-4711
Fax +81-44-819-4713

Measuring Instruments, 13th

Automated coating weight measurement system and thin film membrane coating device

Automated coating weight measurement system and thin film membrane coating device

This is a thin film lamination layer coating device that can instantly measure and manage trace amounts of coating weight, as little as 0.01mg/cm2. It possesses various patented technologies, including the Impact Pulse® construction method that can thinly and uniformly apply coating on various kinds of coating materials, including uneven surfaces.Their fuel cells, water electrolysis, solid-state batteries, next generation rechargeable batteries, and next generation solar cells (Perovskite solar cells) are all highly praised, and are used by world-leading Japanese and overseas companies (for example, vehicle manufacturers and research institutes). This device can also be applied to other fields.

 
Mtek-smart Corporation
Address 【Kawasaki LAB.】KBIC # 115 7 – 7 Shinakawasaki Saiwai-ku Kawasaki, Kanagawa 212-0032
【YOKOHAMA Office】8F,#12 Nisso Bldg.,3-6-12,Shin-yokohama,Kohoku-Ku, Yokohama, Kanagawa 222-0033
Tel +81-45-620-8062
Fax +81-45-330-4288

Environment / Energy, 15th

WaxRecycle, a vomit solidifier (quick response kit)

WaxRecycle, a vomit solidifier (quick response kit)

This quick response kit is equipped with a vomit solidifier and consumables needed to clean up vomit. The main ingredient in the solidifier is waste from stripping floor wax when cleaning buildings. The solidifier quickly solidifies vomit, it kills germs, and it eliminates odors. For materials, they reuse materials previously disposed of as waste, including water absorbent polymer collected from floor wax stripped waste liquid, and sawdust. These processes contribute to the prevention of global warming.

 
Wako Sangyo Co.,Ltd.
Address 1-3-17 Kokan-dori, Kawasaki-ku, Kawasaki, Kanagawa 210-0852
Tel +81-44-333-7283
Fax +81-44-333-7257

Interior / Household Products, 17th

Electrostatic Adhesion Board “ESCLIP”

静電吸着ボード「ESCLIP」

The development of this display board adopts semiconductor device parts manufacturing technology. It allows paper to be easily adhered to it and peeled from it by utilizing weak static electricity. Custom-made products can be ordered to each customer’s specifications. Thanks to its power saving design, the adhesion lasts for approximately half a year with batteries, even with constant operation. This board is expected to be used for a wide variety of applications, including education and performing arts.

 
Creative Technology Corporation
Address 1-11-33 Kamisakunobe, Takatsu-ku, Kawasaki, Kanagawa 213-0034
Tel +81-44-853-1757
Fax +81-44-861-5096

Interior / Household Products, 20th

Portable Combustor “M.B.K. Grill Pad”

Portable Combustor “M.B.K. Grill Pad”

This product is an assembly-type combustor that does not need any equipment, and can be easily dismantled and assembled with 7 parts. It is lightweight, with all parts being 1.5mm in thickness. It can be repeatedly used with consideration to heat distortion, and is both compact and durable. Because of its design that can perform laser processing to meet the needs of users, they have received inquiries about this product from influencers and events.

 
MEYKOU Co., Ltd.
Address 4-27-14 Kuji, Takatsu-ku, Kawasaki-shi, 213-0032
Tel +81-44-328-9268
Fax +81-44-328-9269

1st, Crime Prevention / Disaster Prevention

“Cyclune” bicycle-parking lot gate

“Cyclune” bicycle-parking lot gate

This bicycle parking lot system reduces the total cost of equipment and maintenance to one-third by achieving unattended, power-saving operation of bicycle parking lots. This product introduced in various parts of the nation contributes to society, the community, and the environment.

 
Tokaigiken Co., Ltd.
Address 【Kawasaki Plant】2-14-17 Kuji, Takatsu-ku,Kawasaki, Kanagawa 213-0032
Tel +81-44-754-0851
Fax +81-44-754-0853

Environment / Energy, 7th

“SNP-α” series antibacterial paints

“SNP-α” series antibacterial paints

This series of colorless antibacterial paints contains titanium-apatite, which has both bacteria and virus inactivation and adsorption functions generated by the photocatalytic effect. The series has a wide variety of applications where an antibacterial effect is needed, such as office automation equipment, equipment for the restaurant industry, and in hospital facilities.

 
Sueyoshi Name Plate Factory Co., Ltd.
Address 1653 Nakanoshima, Tama-ku, Kawasaki, Kanagawa 214-0012
Tel +81-44-922-4811
Fax +81-44-922-4812

Environment / Energy, 11th

Air-buffer material made with biomass plastic

Air-buffer material made with biomass plastic

In order to reduce carbon-dioxide emissions and cut back on the use of petroleum resources, an air-buffer material is made with biomass plastic film produced from plant plastic whose raw ingredient consists of molasses, a residual by-product of the process of extracting edible sugar from sugarcane. This product can even be reused and recycled. Machines for producing the buffer material have also been developed by the company. The fact that users can produce just the amount of air-buffer material that they need on-site thanks to a system for renting machines that eliminates the need to make an initial investment is also an advantage.

 
Nexusair Co., Ltd.
Address 3234-3 Noborito, Tama-ku, Kawasaki, Kanagawa 214-0014
Tel +81-44-922-6951
Fax +81-44-922-6953

Telecommunications / Electronics, 13th

Tablet data syncing software and cableless charging rack, “Tablet Admin”

Tablet data syncing software and cableless charging rack, “Tablet Admin”

This tablet administrator can sync data for a max of 40 Android smartphones and tablets at once. It has evolved into an RPA tool that can automate kitting, and reduces the effort required for troublesome settings before adoption by 1/10. This software has a wide range of uses that meet various needs, from kitting to managing paperless meetings.

 
Toshin Electric Co.,Ltd.
Address Micom City, 2-6-4 Kuriki, Asou-ku, Kawasaki, Kanagawa 215-0033
Tel +81-44-980-3120
Fax +81-44-980-3145

Telecommunications / Electronics, 15th

`Dakoku-chan Touch’, an attendance management system supporting IC card and facial recognition

`Dakoku-chan Touch', an attendance management system supporting IC card and facial recognition

This timecard system allows attendance management and personnel recognition. A user simply needs to hold an IC card, like Pasmo or Suica, over the reader. The system generates 4 types of stamps: Present, Clocked Out, Out of the Office, or Returning. Stamp logs can be checked, employee information can be managed, and the system can be linked to payroll software. This system can easily be introduced by a small or medium-sized company, and it allows a company to product prices low in its industry. Impersonation can be prevented through use of the Facial Recognition option based on an open patent from NHK.

 
Data Process Service Co., Ltd.
Address 1-9-1 Isago, Kawasaki-ku, Kawasaki, 210-0006
Tel +81-44-222-0711
Fax +81-44-222-7844

Machining Equipment, 17th

Hydraulic Servo Amplifier “KSV series”

Hydraulic Servo Amplifier

A hydraulic servo amplifier. Unlike conventional products, the output current can easily be switched with an internal switch, according to the rated current of the servo valve. Furthermore, it has both positive and negative feedbacks. It is possible for the PID to be set by a trimmer. It has been introduced in inspection machines and ship anti-rolling devices.

 
KOENN Co.,Ltd.
Address 4-26-41 Kuji, Takatsu-ku, Kawasaki, Kanagawa 213-0032
Tel +81-44-811-3421
Fax +81-44-811-2238